Niu, W., Li, Z., Ernst, F., Ye, C., & Lillard, R.(2018).Stress--Corrosion Cracking of Surface-Engineered Alloys in Simulated Boiling-Water-Reactor Environment..
Verma, A., French, R. H., & Carter, J. W.(2017).Physics Informed Network Models: Data Science Approach to Metals Design.Integrating Materials and Manufacturing Innovation/Springer,6(4),279–287.
Verma, A., & Carter, J. W.(2017).Physics-Informed Network Models: A Data Science Approach to Metal Design.Integrating Materials and Manufacturing Innovation,6(4),279-287.
Lagerlof, P.(2017).Room-Temperature Plastic Deformation of Strontium Titanate Crystals Grown from Different Chemical Compositions.Crystals 2017, 7, 351; doi:10.3390/cryst7110351.
Wang, Y., Merzlic, S., Fairbrother, A., Julien, S., Fridman, L., Loyer, C., Lefebvre, A., O'Brien, G., Gu, X., Ji, L., Boyce, K., Kempe, M., Wang, K., & Bruckman, L.(2017).Degradation Models of Photovoltaic Module Backsheets Exposed to Diverse Real World Condition..
Fairbrother, A., Avenet, J., Lyu, Y., Boyd, M., Julien, S., Wang, K., Ji, L., Boyce, K., Merzlic, S., Lefebvre, A., O'Brien, G., Wang, Y., Bruckman, L., Kempe, M., Dougherty, B., & Gu, X.(2017).Photovoltaic Array Differential Backside Exposure Conditions: Backsheet Degradation and Site Design..
Gok, A., Ngendahimana, D., Fagerholm, C., French, R. H., Sun, J. H., & Bruckman, L. H.(2017).Predictive models of poly(ethyleneterephthalate) film degradation under multifactor accelerated weathering exposures.PLoS ONE,12(5).
Parikh, H., Hilli, N., De Guire, M. R., Heuer, A. H., Liu, Z. H., & Goettler, R. H.(2017).Long-term Microstructural Changes in Solid Oxide Fuel Cell Anodes: 3D Reconstruction.J. Am. Ceram. Soc.,100(4),1653–1660.
Lavvafi, H., Lewandowski, M., Schwam, D., & Lewandowski, J. J.(2017).Effects of surface laser treatments on microstructure, tension, and fatigue behavior of AISI 316LVM biomedical wires.Materials Science and Engineering A,688, 101-113.
Wang, D., Kahn, H., Ernst, F., & Heuer, A.(2017)."Colossal" interstitial supersaturation in delta ferrite in stainless steels: (II) low-temperature nitridation of the 17-7 PH alloy.Acta Materialia,124, 237-246.
Dahar, M., Tamirisakandala, S., & Lewandowski, J. J.(2017).Fatigue crack growth and fracture behavior of as-cast Ti-43.5Al-4Nb-1Mo-0.1B (TNM) compared to Ti-48Al-2Nb-2Cr (4822).Intermetallics,91, 158-168.
Fairbrother, A., Julien, S., Wan, K., Ji, L., Boyce, K., Merzlic, S., Lefebvre, A., O'Brien, G., Wang, Y., Bruckman, L., & Others, L.(2017).Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets.,10370, 1037003.
Holroyd, N., Burnett, T., Seifi, M., & Lewandowski, J. J.(2017).Improved understanding of environment-induced cracking (EIC) of sensitized 5XXX series aluminium alloys.Materials Science and Engineering A,682, 613-621.
Wang, Y., Fairbrother, A., Merzlic, S., Julien, S., Fridman, L., Loyer, C., Lefebvre, A., O'Brien, G., Gu, X., Ji, L., Boyce, K., Kempe, M., Wan, K., & Bruckman, L.(2017).Model development of degradation of PV modules backsheet with locating place of module.,10370
Pal, S., Alam, M., Odette, G., Maloy, S., Hoelzer, D., & Lewandowski, J. J.(2017).Microstructure, Texture and Mechanical Properties of the 14YWT Nanostructured Ferritic Alloy NFA-1.Mechanical and Creep Behavior of Advanced Materials.
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J.(2017).Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification.JOM,69(3),439-455.
Buckley, D., Bourke, A., Lynch, R., Quill, N., Miller, M., Wainright, J., & Savinell, R. F.(2017).Influence of Pretreatment on Kinetics at Carbon Electrodes and Consequences for Flow Battery Performance.MRS Advances.
Matthews, R., Glasser, E., Sprawls, S., French, R. H., Peshek, T. H., Pentzer, E. H., & Martin, I. H.(2017).Organofunctional Silane Modification of Aluminum-Doped Zinc Oxide Surfaces as a Route to Stabilization.ACS Applied Materials & Interfaces,9(20),17620-17628.
Fongkaew, I., Akrobetu, R., Sehirlioglu, A., Voevodin, A., Limpijumnong, S., & Lambrecht, W.(2017).Core-level binding energy shifts as a tool to study surface processes on LaAlO 3 /SrTiO 3.Journal of Electron Spectroscopy and Related Phenomena,218, 21-29.
Selverston, S., Savinell, R. F., & Wainright, J. S.(2017).Zinc-Iron Flow Batteries with Common Electrolyte.Journal of the Electrochemical Society,164(6),A1069.
