Li, Z., Paramasivam, T., Niu, W., Wang, Y., O Anderoglu, Y., Heuer, A., Maloy, S., Lillard, R., & Ernst, F.(2018).Surface Engineering of IN-718 by Low-Temperature Carburization: Properties and Thermal Stability.Acta Materialia.
Stricker, E., Krueger, K., Savinell, R. F., & Wainright, J. F.(2018).Investigating a Bromide Supported Electrolyte for an All-Copper Flow Battery.Journal of The Electrochemical Society,165(9),A1797-A1804.
Hoyt, N., Agar, E., Nagelli, E., Savinell, R. F., & Wainright, J. S.(2018).Electrochemical Impedance Spectroscopy of Flowing Electrosorptive Slurry Electrodes.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,165(10),E439-E444.
Braid, J., Curran, A., Sun, J., Schneller, E., Fada, J., Liu, J., Wang, M., Longacre, A., Dai, J., Huey, B., Davis, K., Jaubert, J., & Bruckman, L.(2018).EL and I - V Correlation for Degradation of PERC vs. Al-BSF Commercial Modules in Accelerated Exposures.IEEE.
Li, Z., Paramasivam, T., Niu, W., Wang, Y., O Anderoglu, Y., Heuer, A., Maloy, S., Lillard, R., & Ernst, F.(2018).Surface Engineering of IN-718 by Low-Temperature Carburization: Properties and Thermal Stability.Surface Engineering,35, 281-293.
Lingala, S., Jayne, D., & Ernst, F.(2018).Effect of Lubricant Additives on the Tribological Behavior of Aluminum Alloy Against Steel Part I: Macrobehavior.International Journal of Materials Research.
Lewandowski, J. J., Salem, A. J., Satko, D. J., & Grylls, R. J.(2018).Effects of Post Processing on Microstructure and Mechanical Properties of SLM-Processed IN-718.The Minerals, Metals, and Materials Society (TMS).
Stricker, E., Krueger, K., Savinell, R. F., & Wainright, J. S.(2018).Investigating a Bromide Supported Electrolyte for an All-Copper Flow Battery.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,165(9),A1797-A1804.
Klinke, A., Gok, A., Ifeanyi, S., & Bruckman, L.(2018).An Automated Algorithm for Quantifying Cracks in Photovoltaic Backsheets Under Accelerated and Real-World Exposures.IEEE.
Martone, A., Lan, S., Dong, B., & Willard, M. A.(2018).Iron-Rich (Fe1-x-yNixCoy)88Zr7B4Cu1 Nanocrystalline Magnetic Materials for High Temperature Applications with Minimal Magnetostriction.AIP Advances.
Lingala, S., Jayne, D., & Ernst, F.(2018).Effect of Lubricant Additives on the Tribological Behavior of Aluminum Alloy Against Steel.International Journal of Materials Research.
Verma, A., & Carter, J. W.(2017).Physics-Informed Network Models: A Data Science Approach to Metal Design.Integrating Materials and Manufacturing Innovation,6(4),279-287.
Verma, A., French, R. H., & Carter, J. W.(2017).Physics Informed Network Models: Data Science Approach to Metals Design.Integrating Materials and Manufacturing Innovation/Springer,6(4),279–287.
Lagerlof, P.(2017).Room-Temperature Plastic Deformation of Strontium Titanate Crystals Grown from Different Chemical Compositions.Crystals 2017, 7, 351; doi:10.3390/cryst7110351.
Wang, Y., Merzlic, S., Fairbrother, A., Julien, S., Fridman, L., Loyer, C., Lefebvre, A., O'Brien, G., Gu, X., Ji, L., Boyce, K., Kempe, M., Wang, K., & Bruckman, L.(2017).Degradation Models of Photovoltaic Module Backsheets Exposed to Diverse Real World Condition..
Fairbrother, A., Avenet, J., Lyu, Y., Boyd, M., Julien, S., Wang, K., Ji, L., Boyce, K., Merzlic, S., Lefebvre, A., O'Brien, G., Wang, Y., Bruckman, L., Kempe, M., Dougherty, B., & Gu, X.(2017).Photovoltaic Array Differential Backside Exposure Conditions: Backsheet Degradation and Site Design..
Gok, A., Ngendahimana, D., Fagerholm, C., French, R. H., Sun, J. H., & Bruckman, L. H.(2017).Predictive models of poly(ethyleneterephthalate) film degradation under multifactor accelerated weathering exposures.PLoS ONE,12(5).
Parikh, H., Hilli, N., De Guire, M. R., Heuer, A. H., Liu, Z. H., & Goettler, R. H.(2017).Long-term Microstructural Changes in Solid Oxide Fuel Cell Anodes: 3D Reconstruction.J. Am. Ceram. Soc.,100(4),1653–1660.
Zhan, X., Zhang, P., Voyles, P., Liu, X., Akolkar, R. N., & Ernst, F. N.(2017).Effect of tungsten alloying on short-to-medium-range-order evolution and crystallization behavior of near-eutectic amorphous NiP.Acta Materialia,122, 400-411.
