Lan, S., & Willard, M. A.(2020).Structural, thermal, and magnetic properties of Fe79MoxB20−xCu1 magnetic amorphous and nanocrystalline alloys.Journal of Magntism and Magnetic Materials,496, 165952.
Wieser, R., Xin, A., & Bruckman, L.(2020).Evaluation and Augmentation of Koppen-Geiger Climate Zone Based off of Real-World Satellite Weather Data.IEEE.
Curran, A., Burleyson, T., Rath, K., Xin, A., Lindig, S., Moser, D., Stein, J., & Bruckman, L.(2020).PVplr: R Package Implementation of Multiple Filters and Algorithms for Time-series Performance Loss Rate Analysis.IEEE.
Adachi, M., Hamaya, S., Yamagata, Y., Loach, A., Fada, J., Wilson, L., Carter, J. W., Fukuyama, H. W., & French, R. H.(2020).In-situ observation of AlN formation from Ni-Al solution using an electromagnetic levitation technique.Journal of the American Ceramic Society.
Carter, J. W., Verma, A. W., & Senanayake, N. W.(2020).Harnessing Legacy Data to Educate Data-Enabled Structural Materials Engineers.MRS Advances,5(7),319-327.
Gbur, J., Kelley, R., & Lewandowski, J. J.(2020).Plasma Focused Ion Beam Serial Sectioning as a Technique to Characterize Nonmetallic Inclusions in Superelastic Nitinol Fine Wires.MICROSCOPY AND MICROANALYSIS,26(6),1088-1099.
Julien, S., Kempe, M., Eafanti, J., Morse, J., Wang, Y., Fairbrother, A., Napoli, S., Hauser, A., Ji, L., O'Brien, G., Gu, X., Bruckman, L., Wan, K., Boyce, K., & French, R. H.(2020).Characterizing photovoltaic backsheet adhesion degradation using the wedge and single cantilever beam tests, Part I: Field Modules.SOLAR ENERGY MATERIALS AND SOLAR CELLS,215
Lyu, Y., Fairbrother, A., Gong, M., Kim, J., Gu, X., Kempe, M., Julien, S., Wan, K., Napoli, S., Hauser, A., O'Brien, G., Wang, Y., Bruckman, L., Ji, L., Boyce, K., & French, R. H.(2020).Impact of environmental variables on the degradation of photovoltaic components and perspectives for the reliability assessment methodology.SOLAR ENERGY,199, 425-436.
Wang, M., Liu, J., Burleyson, T., Schneller, E., Davis, K., French, R. H., & \customboldJennifer L. Braid, R. H.(2020).Analytic Isc –Voc Method and Power Loss Modes From Outdoor Time-Series I–V Curves.IEEE Journal of Photovoltaics.
Shen, X., Sinclair, N., Wainright, J. S., Akolkar, R. N., & Savinell, R. F.(2020).Evaluating and developing a reliable reference electrode for choline chloride based deep eutectic solvents.Journal of the Electrochemical Society,167, 086509.
Pachuta, K., Pentzer, E., & Sehirlioglu, A.(2020).Evaluating the chemical exfoliation of lithium cobalt oxide using UV-Vis spectroscopy.Nanoscale Advances,2(11),5362-5374.
Verma, A., Hawk, J., Romanov, V., & Carter, J. W.(2020).Predictions of long-term creep life for the family of 9–12 wt\% Cr martensitic steels.Journal of Alloys and Compounds,815, 152417.
Mertova, K., Dzugan, J., Roudnicka, M., Daniel, M., Vojtech, D., Seifi, M., & Lewandowski, J. J.(2020).Build Size and Orientation Influence on Mechanical Properties of Powder Bed Fusion Deposited Titanium Parts.METALS,10(10).
Julien, S., Kempe, M., Eafanti, J., Morse, J., Wang, Y., Fairbrother, A., Napoli, S., Hauser, A., Ji, L., O'Brien, G., Gu, X., Bruckman, L., Wan, K., Boyce, K., & French, R. H.(2020).Characterizing photovoltaic backsheet adhesion degradation using the wedge and single cantilever beam tests, Part II: Accelerated tests.SOLAR ENERGY MATERIALS AND SOLAR CELLS,211
French, R. H., & Bruckman, L. H.(2020).Learnings from developing an applied data science curricula for undergraduate and graduate students.MRS ADVANCES,5(7),347-353.
Willard, M. A., & Martone, A. A.(2020).Nanocrystallites via Direct Melt Spinning of Fe77Ni5.5Co5.5Zr7B4Cu for Enhanced Magnetic Softness.Physica Status Solidi A .
Longacre, A., Martin, M., Moran, T., Kolosov, O., Schneller, E., Curran, A., Wang, M., Dai, J., Bruckman, L., Jaubert, J., Davis, K., Braid, J., Huey, B., & French, R. H.(2020).Direct nanoscale mapping of open circuit voltages at local back surface fields for PERC solar cells.JOURNAL OF MATERIALS SCIENCE,55(25),11501-11511.
Schiltz, J., Alamos, F., Kozlovsky, K., Attardo, R., Gatrell, B., Budzinski, J., Tomonto, C., McGuffin-Cawley, J. D., & Schmid, S. D.(2020).Fatigue Performance of Direct Metal Laser Sintered Parts using Reused Metallic Feedstocks.Procedia Manufacturing,48, 814-820.
De Guire, E., Bartolo, L., Brindle, R., Devanathan, R., Dickey, E., Fessler, J., Fotheringham, U., Harmer, M., Lara-Curzio, E., Lichtner, S., Maillet, E., Mauro, J., Mecklenborg, M., Meredig, B., Rengarajan, V., Rickman, J., Sinnott, S., Spahr, C., Suh, C., Tandia, A., Ward, L., Weber, R., & French, R. H.(2019).Data-driven glass/ceramic science research: Insights from the glass and ceramic and data science/informatics communities.Journal of the American Ceramic Society,102(11),6385-6406.
Morrison, R., Fensin, S., & Carter, J. W.(2019).Exploration of the sliding behavior of a S11 grain boundary with precipitates in Ni�Al system using molecular dynamics.Materialia,7
Karimi, A., Fada, J., Hossain, M., Yang, S., Peshek, T., Braid, J., & French, R. H.(2019).Automated Pipeline for Photovoltaic Module Electroluminescence Image Processing and Degradation Feature Classification.IEEE Journal of Photovoltaics,9(5),1324-1335.
