Pickering, E., Hossain, M., French, R. H., & Abramson, A. R.(2018).Building electricity consumption: Data analytics of building operations with classical time series decomposition and case based subsetting.Energy and Buildings,177, 184-196.
Lyu, Y., Fairbrother, A., Kim, J., Gu, X., Kempe, M., Ji, L., Whitfield, K., Boyce, K., Hauser, A., O�Brien, G., Julien, S., Wan, K., Wang, Y., & Bruckman, L.(2018).Degradation analysis of polyamide-based backsheets in field photovoltaic modules under different climatic conditions (Conference Presentation).New Concepts in Solar and Thermal Radiation Conversion and Reliability.
Lingala, S., Jayne, D., & Ernst, F.(2018).Effect of lubricant additives on the tribological behavior of aluminum alloy against steel.International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde),109(9),789-802.
Li, Z., Paramasivam, T., Niu, W., Wang, Y., Anderoglu, O., Heuer, A., Maloy, S., Lillard, R., & Ernst, F.(2018).Surface engineering of IN-718 by low-temperature carburisation: properties and thermal stability.Surface Engineering.
Gao, W., Wang, D., Seifi, M., & Lewandowski, J. J.(2018).Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy.Materials Science and Engineering A,730, 367-379.
Klinke, A., Gok, A., Ifeanyi, S., & Bruckman, L.(2018).A non-destructive method for crack quantification in photovoltaic backsheets under accelerated and real-world exposures.Polymer Degradation and Stability,153, 244-254.
Niu, W., Li, Z., Ernst, F., Ren, Z., Ye, C., & Lillard, R.(2018).Stress�Corrosion Cracking of Surface-Engineered Alloys in a Simulated Boiling-Water Reactor Environment.CORROSION,74(6),635-653.
Braid, J., Curran, A., Sun, J., Schneller, E., Fada, J., Liu, J., Wang, M., Longacre, A., Dai, J., Huey, B., Davis, K., Jaubert, J., & Bruckman, L.(2018).EL and I-V Correlation for Degradation of PERC vs. Al-BSF Commercial Modules in Accelerated Exposures..
Dahar, M., Tamirisakandala, S., & Lewandowski, J. J.(2018).Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings.International Journal of Fatigue,111, 54-69.
\customboldJ. L. Braid, Curran, A., Sun, J., Schneller, E., Fada, J., Liu, J., Wang, M., Longacre, A., Dai, J., Huey, B., Davis, K., Jaubert, J., & Bruckman, L.(2018).EL and I-V Correlation for Degradation of PERC vs. Al-BSF Commercial Modules in Accelerated Exposures..
Wang, Y., Huang, W., Fairbrother, A., Loyer, C., Hauser, A., Julien, S., Gu, X., O'Brien, G., Boyce, K., Kempe, M., Wan, K., & Bruckman, L.(2018).Accelerated Exposure Tests for Photovoltaic Backsheets to Cross-Correlate Real-World Climate Zones..
Niu, W., Li, Z., Ernst, F., Ren, Z., Ye, C., & Lillard, R.(2018).Stress Corrosion Cracking of Surface-Engineered Alloys in a Simulated Boiling-Water Reactor Environment.Corrosion,74(6),635-653.
Chung, K., Hashiguchi, D., Park, C., Bindas, E., Xiang, J., Willard, M. A., & Lewandowski, J. J.(2018).Comparison of consolidation processes of mechanically alloyed Al-SiC metal matrix composite powders.Metal Powder Industries Federation.
Miller, D., Annigoni, E., Ballion, A., Bokria, J., Bruckman, L., Burns, D., Chen, X., Feng, J., Fowler, S., Honeker, C., Kempe, M., Khonkar, H., Köhl, M., Perret-Aebi, L., Phillips, N., Scott, K., Sculati-Meillaud, F., & Wohlgemuth, J.(2018).Degradation in PV encapsulant strength of attachment: An interlaboratory study towards a climate-specific test..
Hassan, H., Hellier, A., Crosky, A., & Lewandowski, J. J.(2018).Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites.Australian Journal of Mechanical Engineering.
Dong, B., Healy, J., Lan, S., Daniil, M., & Willard, M. A.(2018).Computational alloy design of (Co 1-x Ni x ) 88 Zr 7 B 4 Cu 1 nanocomposite soft magnets.AIP Advances,8(5).
Jalabert, D., Zaid, H., Berger, M., Fongkaew, I., Lambrecht, W., & Sehirlioglu, A.(2018).Ion blocking dip shape analysis around a LaAlO 3 /SrTiO 3 interface.Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms,423, 67-71.
Martone, A., Dong, B., Lan, S., & Willard, M. A.(2018).Iron-rich (Fe 1-x-y Ni x Co y ) 88 Zr 7 B 4 Cu 1 nanocrystalline magnetic materials for high temperature applications with minimal magnetostriction.AIP Advances,8(5).
Zaid, H., Berger, M., Jalabert, D., Walls, M., Akrobetu, R., Goble, N., Gao, X., Berger, P., Fongkaew, I., Lambrecht, W., & Sehirlioglu, A.(2018).Role of the different defects, their population and distribution in the LaAlO 3 /SrTiO 3 heterostructure's behavior.Journal of Applied Physics,123(15).
Dzugan, J., Prochazka, R., Rund, M., Podany, P., Konopik, P., Seifi, M., & Lewandowski, J. J.(2018).Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V.Materials Characterization.
Ke, X., Alexander, J., & Savinell, R. F.(2018).Redox flow batteries with serpentine flow fields: Distributions of electrolyte flow reactant penetration into the porous carbon electrodes and effects on performance.Journal of Power Sources,384, 295-302.
