Pickering, E., Hossain, M., Mousseau, J., Swanson, R., French, R. H., & Abramson, A. R.(2017).A cross-sectional study of the temporal evolution of electricity consumption of six commercial buildings.PLoS ONE,12(10).
Faber, K., Asefa, T., Backhaus-Ricoult, M., Brow, R., Chan, J., Dillon, S., Fahrenholtz, W., Finnis, M., Garay, J., García, R., Gogotsi, Y., Haile, S., Halloran, J., Hu, J., Huang, L., Jacobsen, S., Lara-Curzio, E., LeBeau, J., Lee, W., Levi, C., Levin, I., Lewis, J., Lipkin, D., Lu, K., Luo, J., Maria, J., Martin, L., Martin, S., Messing, G., Navrotsky, A., Padture, N., Randall, C., Rohrer, G., Rosenflanz, A., Schaedler, T., Schlom, D., Sehirlioglu, A., Stevenson, A., Tani, T., Tikare, V., Trolier-McKinstry, S., Wang, H., & Yildiz, B.(2017).The role of ceramic and glass science research in meeting societal challenges: Report from an NSF-sponsored workshop.Journal of the American Ceramic Society.
Zhan, X., Zhang, P., Voyles, P., Liu, X., Akolkar, R. N., & Ernst, F. N.(2017).Effect of tungsten alloying on short-to-medium-range-order evolution and crystallization behavior of near-eutectic amorphous NiP.Acta Materialia,122, 400-411.
Burnett, T., Holroyd, N., Lewandowski, J. J., Ogurreck, M. J., Grau, V. J., Kelley, R. J., Pickering, E. J., Daly, M. J., Sherry, A. J., Pawar, S. J., Slater, T. J., & Withers, P. J.(2017).Degradation of metallic materials studied by correlative tomography.IOP Conference Series: Materials Science and Engineering,219
MIller, M., Wainright, J. S., & Savinell, R. F.(2017).Iron Electrodeposition in a Deep Eutectic Solvent for Flow Batteries.Journal of the Electrochemical Society,164(4),A796.
Lavvafi, H., Lewandowski, M., Schwam, D., & Lewandowski, J. J.(2017).Effects of surface laser treatments on microstructure, tension, and fatigue behavior of AISI 316LVM biomedical wires.Materials Science and Engineering A,688, 101-113.
Wang, D., Kahn, H., Ernst, F., & Heuer, A.(2017)."Colossal" interstitial supersaturation in delta ferrite in stainless steels: (II) low-temperature nitridation of the 17-7 PH alloy.Acta Materialia,124, 237-246.
Dahar, M., Tamirisakandala, S., & Lewandowski, J. J.(2017).Fatigue crack growth and fracture behavior of as-cast Ti-43.5Al-4Nb-1Mo-0.1B (TNM) compared to Ti-48Al-2Nb-2Cr (4822).Intermetallics,91, 158-168.
Holroyd, N., Burnett, T., Seifi, M., & Lewandowski, J. J.(2017).Improved understanding of environment-induced cracking (EIC) of sensitized 5XXX series aluminium alloys.Materials Science and Engineering A,682, 613-621.
Fairbrother, A., Julien, S., Wan, K., Ji, L., Boyce, K., Merzlic, S., Lefebvre, A., O'Brien, G., Wang, Y., Bruckman, L., & Others, L.(2017).Degradation analysis of field-exposed photovoltaic modules with non-fluoropolymer-based backsheets.,10370, 1037003.
Pal, S., Alam, M., Odette, G., Maloy, S., Hoelzer, D., & Lewandowski, J. J.(2017).Microstructure, Texture and Mechanical Properties of the 14YWT Nanostructured Ferritic Alloy NFA-1.Mechanical and Creep Behavior of Advanced Materials.
Wang, Y., Fairbrother, A., Merzlic, S., Julien, S., Fridman, L., Loyer, C., Lefebvre, A., O'Brien, G., Gu, X., Ji, L., Boyce, K., Kempe, M., Wan, K., & Bruckman, L.(2017).Model development of degradation of PV modules backsheet with locating place of module.,10370
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J.(2017).Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification.JOM,69(3),439-455.
Buckley, D., Bourke, A., Lynch, R., Quill, N., Miller, M., Wainright, J., & Savinell, R. F.(2017).Influence of Pretreatment on Kinetics at Carbon Electrodes and Consequences for Flow Battery Performance.MRS Advances.
Matthews, R., Glasser, E., Sprawls, S., French, R. H., Peshek, T. H., Pentzer, E. H., & Martin, I. H.(2017).Organofunctional Silane Modification of Aluminum-Doped Zinc Oxide Surfaces as a Route to Stabilization.ACS Applied Materials & Interfaces,9(20),17620-17628.
Fongkaew, I., Akrobetu, R., Sehirlioglu, A., Voevodin, A., Limpijumnong, S., & Lambrecht, W.(2017).Core-level binding energy shifts as a tool to study surface processes on LaAlO 3 /SrTiO 3.Journal of Electron Spectroscopy and Related Phenomena,218, 21-29.
Selverston, S., Savinell, R. F., & Wainright, J. S.(2017).Zinc-Iron Flow Batteries with Common Electrolyte.Journal of the Electrochemical Society,164(6),A1069.
Lavvafi, H., Lewandowski, M., Schwam, D., & Lewandowski, J. J.(2017).Effects of Surface Laser Treatments on Microstructure, Tension, and Fatigue Behavior of AISI 316LVM Biomedical Wires.Materials Science and Engineering A,A688, 101-113.
Gordon, D., Denoyer, L., Meyer, C., Sweet, N., Burns, D., & Bruckman, L.(2017).Characterizing the Weathering Induced Changesin Optical Performance and Properties of Poly(ethylene-terephthalate) via MaPd:RTS Spectroscopy.SPIE-INT SOC OPTICAL ENGINEERING,10370
Khalifa, A., Ferng, T., Shaw, G., Lewandowski, J. J., Liaw, P. J., & Zhang, Y. J.(2017).High Entropy Alloy Wires of Al0.3CoCrFeNi with High Tensile Strength and Ductility at Ambient and Cryogenic Temperature.Acta MATERIALIA,123, 285-294.
