Hoyt, N., Wainright, J. S., & Savinell, R. F.(2016).Modeling of Flowable Slurry Electrodes with Combined Faradaic and Nonfaradaic Currents.Chemical Engineering Science.
Kahn, H., Ernst, F., & Heuer, A. H.(2016).Increasing the Coefficient of Sliding Friction of NiCr at Low Loads by Interstitial Surface Hardening.Wear,346, 1-5.
Gordon, D., Gok, A., Meyer, C., Fagerholm, C., Sweet, N., Denoyer, L., & Bruckman, L.(2016).Characterizing the Weathering Induced Haze Formation and Gloss Loss of Poly(ethylene-terephthalate) via MaPd:RTS Spectroscopy.SPIE-INT SOC OPTICAL ENGINEERING,9938
Savinell, R. F., Hoyt, N. F., & Wainright, J. S.(2016).Characterization of Slurry Electrodes Using Electrochemical Impedance Spectroscopy.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,163(1),A5001-A5009.
Kowalski, B., Sayir, A., & Sehirlioglu, A.(2016).Aliovalent MnTi and GaTi substitution in high temperature piezoelectric (x)Bi(Zn0.5Zr0.5)O3 – (y)BiScO3 – (100-x-y)PbTiO3,.J. Mater. Sci.,51(14),6761.
Aydogan, E., Pal, S., Anderoglu, O., Maloy, S., Vogel, S., Odette, G., Lewandowski, J. J., Hoelzer, D. J., Anderson, I. J., & Rieken, J. J.(2016).Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys.Materials Science and Engineering A [09215093],661, 222-232.
Miller, M., Bourke, A., Quill, N., Wainright, J., Lynch, R., Buckley, D., & Savinell, R. F.(2016).Kinetic Study of Electrochemical Treatment of Carbon Fiber Microelectrodes Leading to In Situ Enhancement of Vanadium Flow Battery Efficiency.Journal of The Electrochemical Society [00134651],163(9),A2095-A2102.
Eifler, J., Podgornik, R., Steinmetz, N., French, R. H., Parsegian, V. H., & Ching, W. H.(2016).Charge distribution and hydrogen bonding of a collagen a 2 -chain in vacuum, hydrated, neutral, and charged structural models: Charge Distribution and HB of a Collagen a 2 -Chain.International Journal of Quantum Chemistry [00207608],116(9),681-691.
Peshek, T., Fada, J., Hu, Y., Xu, Y., Elsaeiti, M., Schnabel, E., Köhl, M., & French, R. H.(2016).Insights into metastability of photovoltaic materials at the mesoscale through massive I–V analytics.Journal of Vacuum Science and Technology B Microelectronics and Nanometer Structures [21662746],34(5).
Heuer, A. H., Ernst, F. H., Kahn, H. H., Collins, S. H., & Natishan, P. H.(2016).Case Hardening of Corrosion Resistant Alloys: Low-Temperature Carburization and “Colossal” Interstitial Supersaturation.Taylor and Francis.
Altfeder, I., Lee, H., Hu, J., Naguy, R., Sehirlioglu, A., Reed, A., Voevodin, A., & Eom, C.(2016).Scanning tunneling microscopy of an interfacial two-dimensional electron gas in oxide heterostructures.Physical Review B [10980121],93(11).
Heuer, A. H., Zahiri Azar, M. H., Guhl, H. H., Foulkes, M. H., Gleeson, B. H., Nakagawa, T. H., Ikuhara, Y. H., & Finnis, M. H.(2016).The Band Structure of Polycrystalline Al 2 O 3 and its Influence on Transport Phenomena.Journal of the American Ceramic Society [00027820],99(3),733-747.
Corrigan, D., Li, S., & Matthiesen, D. H.(2016).Computational fluid dynamics modeling of the structural influences on offshore wind measurements at the Cleveland water intake crib in Lake Erie.Wind Engineering,40(3),283-292.
Seifi, M., Ghamarian, I., Samimi, P., Ackelid, A., Collins, P., & Lewandowski, J. J.(2015).Grain Orientation Effects on Grain Boundary Delamination During Fatigue of a Sensitized Al-Mg Alloy.Philosophical Magazine Letters,95(11),526-533.
Yi, J., Wang, W., & Lewandowski, J. J.(2015).Guiding and Deflecting Cracks in Bulk Metallic Glasses to Increase Damage Tolerance.Advanced Engineering Materials.
Carter, J. W., Sosa, J. W., Shade, P. W., Hamish, F. W., Michael, U. W., & Michael, M. W.(2015).The Potential Link Between High Angle Grain Boundary Morphology and Grain Boundary Deformation in a Nickel-based Superalloy.Materials Science and Engineering A,640, 280-286.
Lin, W., Peshek, T., Bruckman, L., & Schuetz, M.(2015).Design Considerations and Measured Performance of Non-Tracked Mirror Augmented Photovoltaics.Journal of Photovoltaics.
Kottman, M., Zhang, S., McGuffin-Cawley, J. D., Denney, P. D., & Narayanan, B. D.(2015).Laser Hot Wire Process: A Novel Process for Near-Net Shape Fabrication for High-Throughput ApplicationsJOM, DOI: 10.1007/s11837-014-1288-1, published online Jan 21, 2015..Laser Hot Wire Process: A Novel Process for Near-Net Shape Fabrication for High-Throughput Applications,67(3),622-928.
Poudel, L., Wen, A., French, R. H., Parsegian, V. H., Podgornik, R. H., Steinmetz, N. H., & Ching, W. H.(2015).Electronic Structure and Partial Charge Distribution of Doxorubicin in Different Molecular Environments.ChemPhysChem.
