Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J.(2016).Overview of Materials Qualification Needs for Metal Additive Manufacturing.JOM,68(3),747-764.
Seifi, M., Holroyd, H., & Lewandowski, J. J.(2016).Deformation Rate and Sensitization Effects on Environmentally Assisted Cracking.Corrosion,72(2),264-283.
Kahn, H., Ernst, F., & Heuer, A. H.(2016).Increasing the Coefficient of Sliding Friction of NiCr at Low Loads by Interstitial Surface Hardening.Wear,346, 1-5.
Gordon, D., Gok, A., Meyer, C., Fagerholm, C., Sweet, N., Denoyer, L., & Bruckman, L.(2016).Characterizing the Weathering Induced Haze Formation and Gloss Loss of Poly(ethylene-terephthalate) via MaPd:RTS Spectroscopy.SPIE-INT SOC OPTICAL ENGINEERING,9938
Savinell, R. F., Hoyt, N. F., & Wainright, J. S.(2016).Characterization of Slurry Electrodes Using Electrochemical Impedance Spectroscopy.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,163(1),A5001-A5009.
Kowalski, B., Sayir, A., & Sehirlioglu, A.(2016).Aliovalent MnTi and GaTi substitution in high temperature piezoelectric (x)Bi(Zn0.5Zr0.5)O3 – (y)BiScO3 – (100-x-y)PbTiO3,.J. Mater. Sci.,51(14),6761.
Aydogan, E., Pal, S., Anderoglu, O., Maloy, S., Vogel, S., Odette, G., Lewandowski, J. J., Hoelzer, D. J., Anderson, I. J., & Rieken, J. J.(2016).Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys.Materials Science and Engineering A [09215093],661, 222-232.
Miller, M., Bourke, A., Quill, N., Wainright, J., Lynch, R., Buckley, D., & Savinell, R. F.(2016).Kinetic Study of Electrochemical Treatment of Carbon Fiber Microelectrodes Leading to In Situ Enhancement of Vanadium Flow Battery Efficiency.Journal of The Electrochemical Society [00134651],163(9),A2095-A2102.
Eifler, J., Podgornik, R., Steinmetz, N., French, R. H., Parsegian, V. H., & Ching, W. H.(2016).Charge distribution and hydrogen bonding of a collagen a 2 -chain in vacuum, hydrated, neutral, and charged structural models: Charge Distribution and HB of a Collagen a 2 -Chain.International Journal of Quantum Chemistry [00207608],116(9),681-691.
Peshek, T., Fada, J., Hu, Y., Xu, Y., Elsaeiti, M., Schnabel, E., Köhl, M., & French, R. H.(2016).Insights into metastability of photovoltaic materials at the mesoscale through massive I–V analytics.Journal of Vacuum Science and Technology B Microelectronics and Nanometer Structures [21662746],34(5).
Altfeder, I., Lee, H., Hu, J., Naguy, R., Sehirlioglu, A., Reed, A., Voevodin, A., & Eom, C.(2016).Scanning tunneling microscopy of an interfacial two-dimensional electron gas in oxide heterostructures.Physical Review B [10980121],93(11).
Heuer, A. H., Zahiri Azar, M. H., Guhl, H. H., Foulkes, M. H., Gleeson, B. H., Nakagawa, T. H., Ikuhara, Y. H., & Finnis, M. H.(2016).The Band Structure of Polycrystalline Al 2 O 3 and its Influence on Transport Phenomena.Journal of the American Ceramic Society [00027820],99(3),733-747.
Heuer, A. H., Ernst, F. H., Kahn, H. H., Collins, S. H., & Natishan, P. H.(2016).Case Hardening of Corrosion Resistant Alloys: Low-Temperature Carburization and “Colossal” Interstitial Supersaturation.Taylor and Francis.
Corrigan, D., Li, S., & Matthiesen, D. H.(2016).Computational fluid dynamics modeling of the structural influences on offshore wind measurements at the Cleveland water intake crib in Lake Erie.Wind Engineering,40(3),283-292.
Poudel, L., Steinmetz, N., French, R. H., Parsegian, V. H., Podgornik, R. H., & Ching, W. H.(2016).Implication of the solvent effect, metal ions and topology in the electronic structure and hydrogen bonding of human telomeric G-quadruplex DNA.Physical Chemistry Chemical Physics [14639076],18(31),21573-21585.
Wang, D., Chen, C., Kahn, H., Ernst, F., & Heuer, A. H.(2016).Isothermal Martensite-to-Austenite Phase Transformation in Interstitially-hardened 17-7PH Stainless Steel.Metallurgical and Materials Transactions A.
Miller, D., Annigoni, E., Ballion, A., Bokria, J., Bruckman, L., Burns, D., Chen, X., Feng, J., Fowler, S., & Others, S.(2016).Degradation in PV Encapsulant Strength of Attachment: An Interlaboratory Study Towards a Climate-Specific Test: Preprint.NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)).
Villaraga-Gomez, H., Seifi, M., Uchiyama, Y., Ramsey, A., & Lewandowski, J. J.(2016).Assessing the Structural Integrity of Additive Manufactured Metal Parts with X-ray CT”, 2016 Summer Topical Meeting – Dimensional Accuracy and Surface Finish in Additive Manufacturing.American Society for Precision Engineering.
Savinell, R. F., & Wainright, J. S.(2016).Communication- Novel Iron Ionic Liquid Electrolytes for Redox Flow Battery Applications.JOURNAL OF THE ELECTROCHEMICAL SOCIETY,163(3),A578-A579.
Gbur, J., & Lewandowski, J. J.(2016).Fatigue and fracture of wires and cables for biomedical applications.International Materials Reviews [09506608],61(4),231-314.
Hoyt, N., Savinell, R. F., & Wainright, J. F.(2016).Modeling of flowable slurry electrodes with combined faradaic and nonfaradaic currents.Chemical Engineering Science [00092509],144, 288-297.
Fada, J., Wheeler, N., Zabiyaka, D., Goel, N., Peshek, T., & French, R. H.(2016).Democratizing an electroluminescence imaging apparatus and analytics project for widespread data acquisition in photovoltaic materials.Review of Scientific Instruments [00346748],87(8).
Zaid, H., Berger, M., Jalabert, D., Walls, M., Akrobetu, R., Fongkaew, I., Lambrecht, W., Goble, N., Gao, X., Berger, P., & Sehirlioglu, A.(2016).Atomic-resolved depth profile of strain and cation intermixing around LaAlO3/SrTiO3 interfaces.Scientific Reports [20452322],6
