Publications (D10)

Adding a new Publication

Below you will see the fields/values needed for Publications you want to be visible on the site and on your profile.

First, enter the Title of the Publication:

After Add Content

The following values are needed for your Publication to be visible.

After Add Content

Add all of the Publication Authors, one at a time.

 

1. Enter the CaseID of the Pub-Author if they are Faculty or Staff at CWRU. Older Publications may have the old Digital Measures IDs listed in that field instead. That is OK.
2. Enter the full First Name of the Pub-Author. Do not enter an Initial only, the system will format it properly for you.
3. Enter the Last Name of the Pub-Author.
4. Click "Create Publication Author"
5. Repeat above steps for each Pub-Author you need to add to this Publication.

Add other values as needed...

Enter the DOI URL for the publication...

Fill out the Date Published (required) and other dates if known:

Research Thrusts on a Publication

To ADD a new Research Thrust to the Publication, go to the research thrust section and enter the research thrust.

To REMOVE a Research Thrust from the Publication, click the remove button on the item you want to be removed.

Remove Publication Authors from the Publication:

To remove an Author from a Publication, you need to make 2 edits.
First, click "Remove" next to the person in the "Author" field.

Next, click "Remove" button next to the person in the "Authors ( Person Object )" field.

Then, at the end, save your changes.

Editing an existing Publication

Most of the fields/values can simply be changed to different values and your changes saved. This section covers other changes you may need to make that aren't as obvious.

Change the order in which Publication Authors are listed:

In the "Authors (Person Object)" field, Click on the move icon next to the Person you want to move...
Please Note: This is not the "Author" field where you add the publication authors. This is a separate field. Scroll down the form page until you see it.

Drag the item to the correct order...

Always Remember to "Save" your changes