Takahashi, F., Katta, V., Linteris, G., & Babushok, V.(2018).Numerical study of gas-phase interactions of phosphorus-containing compounds with co-flow diffusion flames.Proceedings of the Combustion Institute.
Li, B., Singer, N., Rosenthal, A., Unal, M., Haggins, D., Yeni, Y., & Akkus, O.(2018).Chemical characterization of Maltese-cross birefringent particles in synovial fluid samples collected from symptomatic joints.Joint Bone Spine,85(4),501-503.
Gao, W., Wang, D., Seifi, M., & Lewandowski, J. J.(2018).Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy.Materials Science and Engineering A,730, 367-379.
McAdams, I., Majerus, S., Zorman, C., & Damaser, M.(2018).A Conductance-Based Sensor to Estimate Bladder Volume in Felines.Proceedings of the The 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.
Boromand, A., Jamali, S., Grove, B., & Maia, J. M.(2018).A generalized frictional and hydrodynamic model of the dynamics and structure of dense colloidal suspensions.Journal of Rheology,62(4),905-918.
Pickard, S., Quinn, R. D., & Szczecinski, N. D.(2018).Simulation of the Arthropod Central Complex: Moving Towards Bioinspired Robotic Navigation Control.Springer.
Majerus, S., Chong, Y., Ariando, D., Swingle, C., Potkay, J., Bogie, K., & Zorman, C.(2018).Vascular Graft Pressure-Flow Monitoring Using 3D Printed MWCNT-PDMS Strain Sensors.Proceedings of the 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.
Li, C., Liao, Y. T., T'ien, J. T., Urban, D. T., Ferkul, P. T., Olson, S. T., Ruff, G. T., & Easton, J. T.(2018).Transient flame growth and spread processes over a large solid fabric in concurrent low-speed flows in microgravity - model versus experiment.Proceedings of the Combustion Institute,37(3),4163-4171.
Chapin, K., Khalifa, A., Mbimba, T., McClellan, P., Anderson, J., Novitsky, Y., Hijaz, A., & Akkus, O.(2018).In vivo biocompatibility and time-dependent changes in mechanical properties of woven collagen meshes: A comparison to xenograft and synthetic mid-urethral sling materials: IN VIVO BIOCOMPATIBILITY AND TIME-DEPENDENT CHANGES IN MECHANICAL PROPERTIES.Journal of Biomedical Materials Research - Part B Applied Biomaterials.
Cao, P., Fan, Z., Gao, R. X., & Stangl, J. X.(2018).Design for Additive Manufacturing: Optimization of Piping Network in Compact System With Enhanced Path-Finding Approach.Journal of Manufacturing Science and Engineering,140(8).
Dahar, M., Tamirisakandala, S., & Lewandowski, J. J.(2018).Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings.International Journal of Fatigue,111, 54-69.
Shoffstall, A., Paiz, J., Miller, D., Rial, G., Willis, M., Menendez, D., Hostler, S., & Capadona, J. R.(2018).Potential for thermal damage to the blood-brain barrier during craniotomy: implications for intracortical recording microelectrodes..Journal of neural engineering,15(3),034001.
Maxwell, B. M., Pekalski, A. M., & Radulescu, M. M.(2018).Modelling of the transition of a turbulent shock-flame complex to detonation using the linear eddy model.Combustion and Flame,192, 340-357.
Chung, K., Hashiguchi, D., Park, C., Bindas, E., Xiang, J., Willard, M. A., & Lewandowski, J. J.(2018).Comparison of consolidation processes of mechanically alloyed Al-SiC metal matrix composite powders.Metal Powder Industries Federation.
Li, Y., Liao, Y. T., & Ferkul, P. T.(2018).Effect of flow duct height on concurrent-flow flame spread and the near-limit oscillation.2018 Spring Technical Meeting of Central States Section of the Combustion Institute.
Kwon, B., & Liao, Y. T.(2018).Experimental and numerical investigation of the ignition and burning characteristics of a group of wooden pieces.2018 Spring Technical Meeting of Central States Section of the Combustion Institute.
Soleimani nia, M., Maxwell, B. M., Oshkai, P. M., & Djilali, N. M.(2018).Experimental and numerical investigation of turbulent jets issuing through a realistic pipeline geometry: Asymmetry effects for air, helium, and hydrogen.International Journal of Hydrogen Energy,43(19),9379-9398.
Hassan, H., Hellier, A., Crosky, A., & Lewandowski, J. J.(2018).Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites.Australian Journal of Mechanical Engineering.
Ozguner, O., Zhao, B., Jackson, R., Shkurti, T., Newman, W. S., & Cavusoglu, M. C.(2018).Three-Dimensional Surgical Needle Localization and Tracking Using Stereo Endoscopic Image Streams..
Leopold, S., Beadling, L., Calabro, A., Dobbs, M., Gebhardt, M., Gioe, T., Manner, P., Porcher, R., Rimnac, C. M., & Wongworawat, M. M.(2018).Editorial: The Complexity of Reporting Race and Ethnicity in Orthopaedic Research.Clinical Orthopaedics and Related Research,476(5),917-920.
Arnholt, C., MacDonald, D., Klein, G., Cates, H., Rimnac, C. M., Kurtz, S. M., Kocagoz, S. M., & Chen, A. M.(2018).What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?.Journal of Arthroplasty.
