Mechanical & Aerospace Engineering Publications

Friday, March 1, 2019

Crack Initiation from a clinically relevant notch in a highly-crosslinked UHMWPE subjected to static and cyclic loading

Sirimamilla, P., & Rimnac, C. M. (2019). Crack Initiation from a clinically relevant notch in a highly-crosslinked UHMWPE subjected to static and cyclic loading. Journal of the Mechanical Behavior of Biomedical Materials, 91 (), 366-372.

Friday, March 1, 2019

Numerical study of fire behavior between two inclined plates

Li, B., & Liao, Y. T. (2019). Numerical study of fire behavior between two inclined plates. 11th U. S. National Combustion Meeting, Pasadena, CA, ().

Friday, March 1, 2019

Upward Flame Spread over Discrete Thin Fuels

Cui, W., & Liao, Y. T. (2019). Upward Flame Spread over Discrete Thin Fuels. 11th U. S. National Combustion Meeting, Pasadena, CA, ().

Friday, February 1, 2019

Controlled mercerization of bacterial cellulose provides tunability of modulus and ductility over two orders of magnitude

Younesi, M., Wu, X., & Akkus, O. (2019). Controlled mercerization of bacterial cellulose provides tunability of modulus and ductility over two orders of magnitude. Journal of the Mechanical Behavior of Biomedical Materials, 90 (), 530-537.

Friday, February 1, 2019

Raman spectroscopy-based water content is a negative predictor of articular human cartilage mechanical function

Unal, M., Akkus, O., Sun, J., Cai, L., Erol, U., Sabri, L., ... Neu, C. (2019). Raman spectroscopy-based water content is a negative predictor of articular human cartilage mechanical function. Osteoarthritis and Cartilage, 27 (2), 304-313.

Friday, February 1, 2019

Abstract A195: Mechanosensory mechanisms and in vivo tissue topology contribute to rheology of circulating leukocytes resulting in efficient post-capillary vessel wall adhesion and recruitment

Huang, A., Benson, B., Correa, L., Li, L., Myers, J., Gurkan, U., ... Ransohoff, R. (2019). Abstract A195: Mechanosensory mechanisms and in vivo tissue topology contribute to rheology of circulating leukocytes resulting in efficient post-capillary vessel wall adhesion and recruitment. CRI-CIMT-EATI-AACR International Cancer Immunotherapy Conference: Translating Science into Survival; September - October 3,; New York, NY, (), A195-A195.

Friday, February 1, 2019

Characterization of nanoscale precipitates in superalloy 718 using high resolution SEM imaging

Smith, T., Senanayake, N., Sudbrack, C., Bonacuse, P., Rogers, B., Chao, P., ... Carter, J. W. (2019). Characterization of nanoscale precipitates in superalloy 718 using high resolution SEM imaging. Materials Characterization, 148 (), 178-187.

Monday, January 7, 2019

Effects of Agent Blending on Fire-Suppression Characteristics

Katta, V., Takahashi, F., & Babushok, V. (2019). Effects of Agent Blending on Fire-Suppression Characteristics. AIAA Scitech Forum, ().

Tuesday, January 1, 2019

Deep learning and its applications to machine health monitoring

Zhao, R., Yan, R., Chen, Z., Mao, K., Wang, P., & Gao, R. X. (2019). Deep learning and its applications to machine health monitoring. Mechanical Systems and Signal Processing, 115 (), 213-237.

Tuesday, January 1, 2019

Analyzing the Interplay Between Local CPG Activity and Sensory Signals for Inter-leg Coordination in Drosophila

Nourse, W., Szczecinski, N., Haustein, M., Bockem\"uhl, Till, B\"uschges, Ansgar, & Quinn, R. D. (2019). Analyzing the Interplay Between Local CPG Activity and Sensory Signals for Inter-leg Coordination in Drosophila. , (), 342--345.

Tuesday, January 1, 2019

Life cycle assessment of osmotic microbial fuel cells for simultaneous wastewater treatment and resource recovery

Zhang, J., Yuan, H., Deng, Y., Abu-Reesh, I., He, Z., & Yuan, C. (2019). Life cycle assessment of osmotic microbial fuel cells for simultaneous wastewater treatment and resource recovery. INTERNATIONAL JOURNAL OF LIFE CYCLE ASSESSMENT, 24 (11), 1962-1975.

Tuesday, January 1, 2019

Digital Twin for Machining Tool Condition Prediction

Qiao, Q., Wang, J., Ye, L., & Gao, R. X. (2019). Digital Twin for Machining Tool Condition Prediction. Procedia CIRP, 81 (), 1388-1393.

Tuesday, January 1, 2019

Drosophibot: a fruit fly inspired bio-robot

Goldsmith, C., Szczecinski, N., & Quinn, R. D. (2019). Drosophibot: a fruit fly inspired bio-robot. , (), 146--157.

Tuesday, January 1, 2019

Life Cycle Assessment of Silicon-Nanotube-Based Lithium Ion Battery for Electric Vehicles

Deng, Y., Ma, L., Li, T., Li, J., & Yuan, C. (2019). Life Cycle Assessment of Silicon-Nanotube-Based Lithium Ion Battery for Electric Vehicles. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 7 (1), 599-610.

Tuesday, January 1, 2019

A new mechanistic model for predicting flow boiling critical heat flux based on hydrodynamic instabilities

Huang, C., & Kharangate, C. (2019). A new mechanistic model for predicting flow boiling critical heat flux based on hydrodynamic instabilities. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 138 (), 1295-1309.

Tuesday, January 1, 2019

Explainable Convolutional Neural Network for Gearbox Fault Diagnosis

Grezmak, J., Wang, P., Sun, C., & Gao, R. X. (2019). Explainable Convolutional Neural Network for Gearbox Fault Diagnosis. Procedia CIRP, 80 (), 476-481.

Tuesday, January 1, 2019

Tuning a Robot Servomotor to Exhibit Muscle-Like Dynamics

Szczecinski, N., Goldsmith, C., Young, F., & Quinn, R. D. (2019). Tuning a Robot Servomotor to Exhibit Muscle-Like Dynamics. , (), 254--265.

Tuesday, January 1, 2019

Nanocomposites of Three-Dimensionally Ordered Porous TiO2 Decorated with Pt and Reduced Graphene Oxide for the Visible-Light Photocatalytic Degradation of Waterborne Pollutants

Huo, J., Yuan, C., & Wang, S. (2019). Nanocomposites of Three-Dimensionally Ordered Porous TiO2 Decorated with Pt and Reduced Graphene Oxide for the Visible-Light Photocatalytic Degradation of Waterborne Pollutants. ACS APPLIED NANO MATERIALS, 2 (5), 2713-2724.

Tuesday, January 1, 2019

Embedded cooling with 3D manifold for vehicle power electronics application: Single-phase thermal-fluid performance

Jung, K., Kharangate, C., Lee, H., Palko, J., Zhou, F., Asheghi, M., ... Goodson, K. (2019). Embedded cooling with 3D manifold for vehicle power electronics application: Single-phase thermal-fluid performance. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 130 (), 1108-1119.

Tuesday, January 1, 2019

Task-Oriented Active Sensing via Action Entropy Minimization

Greigarn, T., Branicky, M., & Cavusoglu, M. C. (2019). Task-Oriented Active Sensing via Action Entropy Minimization. IEEE Access, ().

Tuesday, January 1, 2019

Generalized Vold-Kalman Filtering for Nonstationary Compound Faults Feature Extraction of Bearing and Gear

Zhao, D., Cheng, W., Gao, R. X., Yan, R., & Wang, P. (2019). Generalized Vold-Kalman Filtering for Nonstationary Compound Faults Feature Extraction of Bearing and Gear. IEEE Transactions on Instrumentation and Measurement, (), 1-7.

Tuesday, January 1, 2019

Nanoparticle Emissions From Metal-Assisted Chemical Etching of Silicon Nanowires for Lithium Ion Batteries

Wang, F., Gao, X., Ma, L., & Yuan, C. (2019). Nanoparticle Emissions From Metal-Assisted Chemical Etching of Silicon Nanowires for Lithium Ion Batteries. JOURNAL OF MICRO AND NANO-MANUFACTURING, 7 (1), 011001.

Tuesday, January 1, 2019

Single-phase thermal and hydraulic performance of embedded silicon micro-pin fin heat sinks using R245fa

Kong, D., Jung, K., Jung, S., Jung, D., Schaadt, J., Lyengar, M., ... Lee, H. (2019). Single-phase thermal and hydraulic performance of embedded silicon micro-pin fin heat sinks using R245fa. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 141 (), 145-155.

Tuesday, January 1, 2019

Origins of turbulent mixing behind detonation propagation into reactive–inert gas interfaces

Maxwell, B. M., & Melguizo-Gavilanes, J. (2019). Origins of turbulent mixing behind detonation propagation into reactive–inert gas interfaces. 27th International Colloquium on the Dynamics of Explosions and Reactive Systems, (), 6 pages.

Tuesday, January 1, 2019

Induction Motor Condition Monitoring for Sustainable Manufacturing

Zhang, J., Wang, P., Gao, R. X., Sun, C., & Yan, R. (2019). Induction Motor Condition Monitoring for Sustainable Manufacturing. Procedia Manufacturing, 33 (), 802-809.

Case School of Engineering

Mechanical & Aerospace Engineering

Mechanical & Aerospace Engineering Publications

Crack Initiation from a clinically relevant notch in a highly-crosslinked UHMWPE subjected to static and cyclic loading

Numerical study of fire behavior between two inclined plates

Upward Flame Spread over Discrete Thin Fuels

Controlled mercerization of bacterial cellulose provides tunability of modulus and ductility over two orders of magnitude

Raman spectroscopy-based water content is a negative predictor of articular human cartilage mechanical function

Abstract A195: Mechanosensory mechanisms and in vivo tissue topology contribute to rheology of circulating leukocytes resulting in efficient post-capillary vessel wall adhesion and recruitment

Characterization of nanoscale precipitates in superalloy 718 using high resolution SEM imaging

Effects of Agent Blending on Fire-Suppression Characteristics

Deep learning and its applications to machine health monitoring

Analyzing the Interplay Between Local CPG Activity and Sensory Signals for Inter-leg Coordination in Drosophila

Life cycle assessment of osmotic microbial fuel cells for simultaneous wastewater treatment and resource recovery

Digital Twin for Machining Tool Condition Prediction

Drosophibot: a fruit fly inspired bio-robot

Life Cycle Assessment of Silicon-Nanotube-Based Lithium Ion Battery for Electric Vehicles

A new mechanistic model for predicting flow boiling critical heat flux based on hydrodynamic instabilities

Explainable Convolutional Neural Network for Gearbox Fault Diagnosis

Tuning a Robot Servomotor to Exhibit Muscle-Like Dynamics

Nanocomposites of Three-Dimensionally Ordered Porous TiO2 Decorated with Pt and Reduced Graphene Oxide for the Visible-Light Photocatalytic Degradation of Waterborne Pollutants

Embedded cooling with 3D manifold for vehicle power electronics application: Single-phase thermal-fluid performance

Task-Oriented Active Sensing via Action Entropy Minimization

Generalized Vold-Kalman Filtering for Nonstationary Compound Faults Feature Extraction of Bearing and Gear

Nanoparticle Emissions From Metal-Assisted Chemical Etching of Silicon Nanowires for Lithium Ion Batteries

Single-phase thermal and hydraulic performance of embedded silicon micro-pin fin heat sinks using R245fa

Origins of turbulent mixing behind detonation propagation into reactive–inert gas interfaces

Induction Motor Condition Monitoring for Sustainable Manufacturing

Pages