Suster, M., Kucukal, E., Gurkan, U., Stavrou, E., Mohseni, P., & Maji, D.(2016).A PMMA microfluidic dielectric sensor for blood coagulation monitoring at the point-of-care.International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).
Zhao, X., Liao, Y. T., Johnston, M. T., Tien, J. S., Ferkul, P. S., & Olson, S. S.(2016).Concurrent flame growth, spread, and quenching over composite fabric samples in low speed purely forced flow in microgravity.Proceedings of the Combustion Institute,36(2),2971-2978.
Tien, J. S., & T'ien, J. S.(2016). Laboratory evaluation of Nomex IIIA aramid fabric as a flammability barrier material in a variable oxygen and pressure atmosphere, ICES-2016-38, 46th International Conference on Environmental Systems.46th International Conference on Environmental Systems,ICES-2016-38
Alapan, Y., Kim, C., Adhikari, A., Gray, K., Gurkan Cavusoglu, E., Little, J., & Gurkan, U.(2016).Sickle Cell Disease Biochip: a functional red blood cell adhesion assay for monitoring sickle cell disease.Transl Res,173, 74 - 91.
Xie, Y., Pan, D., Ma, L., & Yuan, C.(2016).Optimizing the process efficiency of atomic layer deposition of alumina for its sustainability improvement: a combined experimental and modeling study.Journal of Cleaner Production ,133(1),338–347.
Seifi, M., Ghamarian, I., Samimi, P., Ackelid, A., Collins, P., & Lewandowski, J. J.(2016).Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Produced via Electron Beam Melting.TMS-International Conference on Ti Alloys.
Seifi, M., Christiansen, D., Harrysson, O., Beuth, J., & Lewandowski, J. J.(2016).Process Mapping and Fracture and Fatigue Behavior of Ti-6Al-4V made by Additive Manufacturing.TMS-International Conference on Ti Alloys.
Park, J., & Liao, Y. T.(2016).Numerical Study of Upward Flame Spread over Discrete Fuels.2016 Eastern State Session Combustion Institute Spring Meeting.
Li, C., & Liao, Y. T.(2016).Numerical Simulation of Flame Splitting Phenomenon in Concurrent Flame Spread over Thin Solid Fuel with Two-Stage Pyrolysis .2016 Eastern State Session Combustion Institute Spring Meeting.
Li, T., & Yuan, C.(2016).An Optimal Design Analysis of a Novel Parabolic Trough Lighting and Thermal System.International Journal of Energy Research ,40(9),1193–1206.
Seifi, M., Salem, A., Beuth, J., Harrysson, O., & Lewandowski, J. J.(2016).Overview of Materials Qualification Needs for Metal Additive Manufacturing.JOM,68(3),747-764.
Islam, A., Chapin, K., Moore, E., Ford, J., Rimnac, C. M., & Akkus, O. M.(2016).Gamma Radiation Sterilization Reduces the High-cycle Fatigue Life of Allograft Bone..Clinical orthopaedics and related research,474(3),827-35.
Seifi, M., Holroyd, H., & Lewandowski, J. J.(2016).Deformation Rate and Sensitization Effects on Environmentally Assisted Cracking.Corrosion,72(2),264-283.
Mansour, J. M., Lee, Z. M., & Welter, J. M.(2016).Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage..Annals of biomedical engineering.
Pan, D., Ma, L., Xie, Y., Jen, T., & Yuan, C.(2016).Effects of gap size, temperature and pumping pressure on the fluid dynamics and chemical kinetics of in-line spatial atomic layer deposition of Al2O3.International Journal of Heat and Mass Transfer ,96, 189-198.
Qiu, M., Xie, Y., Gao, X., Li, J., Deng, Y., Guan, D., Ma, L., & Yuan, C.(2016).Band Gap Opening and Semiconductor-metal Phase Transition in (n, n) Single-Walled Carbon Nanotubes with Distinctive Boron-Nitrogen Line Defect.Physical Chemistry Chemical Physics ,18, 4643-4651.
Gillespie, R., Knapik, D., & Akkus, O.(2016).Biologic and Synthetic Grafts in the Reconstruction of Large to Massive Rotator Cuff Tears.Journal of the American Academy of Orthopaedic Surgeons,24(12),823–828.
Torres, A., Matheny, J., Keaveny, T., Taylor, D., Rimnac, C. M., & Hernandez, C. M.(2016).Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure.Proceedings of the National Academy of Sciences of the United States of America [00278424],113(11),2892-2897.
Mendible, G., Kazmer, D., Gao, R. X., & Johnston, S. X.(2016).Estimation of Bulk Melt-Temperature from In-Mold Thermal Sensors for Injection Molding, Part B: Validation.International Polymer Processing The Journal of the Polymer Processing Society [0930777X],31(3),278-284.
