Webster, V., Hawley, E., Akkus, O., Chiel, H., & Quinn, R. D.(2016).Effect of actuating cell source on locomotion of organic living machines with electrocompacted collagen skeleton.Bioinspiration and Biomimetics [17483182],11(3).
Fan, Z., Gao, R. X., Wang, P. X., & Kazmer, D. X.(2016).Multi-sensor data fusion for improved measurement accuracy in injection molding.IEEE International Instrumentation and Measurement Technology Conference.
Ranka, T., Garcia-Sanz, M., Symmes, A., Ford, J., & Weadon, T.(2016).Dynamic analysis of the Green Bank Telescope structure and servo system.Journal of Astronomical Telescopes, Instruments, and Systems [23294124],2(1).
Alapan, Y., Kim, C., Adhikari, A., Gray, K., Gurkan-Cavusoglu, E., Little, J., & Gurkan, U.(2016).Sickle cell disease biochip: a functional red blood cell adhesion assay for monitoring sickle cell disease.Translational Research [19315244],173, 74-91.e8.
Kharangate, C., O'Neill, L., & Mudawar, I.(2016).Effects of two-phase inlet quality, mass velocity, flow orientation, and heating perimeter on flow boiling in a rectangular channel: Part 1-Two-phase flow and heat transfer results.INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,103, 1261-1279.
Pangsrivinij, S., McGuffin-Cawley, J. D., Quinn, R. D., Narayanan, B. D., Zhang, S. D., & Denney, P. D.(2016).Calculation of energy balance and efficiency in Laser Hot-Wire (LHW) cladding process..
Donmez, B., Unal, M., Ozdemir, S., Ozturk, N., Oguz, N., & Akkus, O.(2016).Effects of losartan treatment on the physicochemical properties of diabetic rat bone.Journal of bone and mineral metabolism.
Wang, F., Wheeler, L., & Garcia-Sanz, M.(2016).Wind turbine power optimization: experimental validation of extremum seeking and perturb & observe strategies.Dynamic Systems and Control Conference (DSCC).
O'Neill, L., Kharangate, C., & Mudawar, I.(2016).Time-averaged and transient pressure drop for flow boiling with saturated inlet conditions.INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,103, 133-153.
Aydogan, E., Pal, S., Anderoglu, O., Maloy, S., Vogel, S., Odette, G., Lewandowski, J. J., Hoelzer, D. J., Anderson, I. J., & Rieken, J. J.(2016).Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys.Materials Science and Engineering A [09215093],661, 222-232.
Akkus, A., Akkus, O., Roperto, R., & Lang, L.(2016).Investigation of Intra-and Inter-individual Variations of Mineralisation in Healthy Permanent Human Enamel by Raman Spectroscopy..Oral health & preventive dentistry,14(4),321–327.
Nandor, M., Chang, S., Kobetic, R., Triolo, R., & Quinn, R. D.(2016).A Hydraulic Hybrid Neuroprosthesis for Gait Restoration in People with Spinal Cord Injuries..
Porto, T., Roperto, R., Akkus, A., Akkus, O., Porto-Neto, S., Teich, S., Lang, L., & Campos, E.(2016).Mechanical properties and DIC analyses of CAD/CAM materials.Journal of Clinical and Experimental Dentistry,8(5),e512.
CARSON, S., Maia, J. M., & COVAS, J. M.(2016).A New Extensional Mixing Element for Improved Dispersive Mixing in Twin-Screw Extrusion, Part 2: Experimental Validation for Immiscible Polymer Blends: RESEARCH ARTICLE.Advances in Polymer Technology [07306679].
Szczecinski, N., Getsy, A., Bosse, J., Martin, J., Ritzmann, R., & Quinn, R. D.(2016).MantisBot Uses Minimal Descending Commands to Pursue Prey as Observed in Tenodera Sinensis..
Webster, V., Chapin, K., Hawley, E., Patel, J., Akkus, O., Chiel, H., & Quinn, R. D.(2016).Aplysia Californica as a Novel Source of Material for Biohybrid Robots and Organic Machines..
Webster, V., Nieto, S., Grosberg, A., Akkus, O., Chiel, H., & Quinn, R. D.(2016).Simulating muscular thin films using thermal contraction capabilities in finite element analysis tools.Journal of the Mechanical Behavior of Biomedical Materials [17516161],63, 326-336.
Zhang, X., Gao, R. X., Yan, R. X., Chen, X. X., Sun, C. X., & Yang, Z. X.(2016).Multivariable wavelet finite element-based vibration model for quantitative crack identification by using particle swarm optimization.Journal of Sound and Vibration [0022460X],375, 200-216.
Ock, H., Kim, D., Ahn, K., Lee, S., & Maia, J. M.(2016).Effect of organoclay as a compatibilizer in poly(lactic acid) and natural rubber blends.European Polymer Journal [00143057],76, 216-227.
Liu, T., & Cavusoglu, M.(2016).Needle Grasp and Entry Port Selection for Automatic Execution of Suturing Tasks in Robotic Minimally Invasive Surgery.IEEE Transactions on Automation Science and Engineering [15455955],13(2),552-563.
Yamoum, C., Maia, J. M., & Magaraphan, R. M.(2016).Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates: Rheological and Thermal Behaviors of PLA with Bis-EMA Crosslinking.Polymers for Advanced Technologies [10427147],28(1),102-112.
Hartwig, J., & Kamotani, Y.(2016).The static bubble point pressure model for cryogenic screen channel liquid acquisition devices.International Journal of Heat and Mass Transfer [00179310],101, 502-516.
Li, B., Singer, N., Yeni, Y., Haggins, D., Barnboym, E., Oravec, D., Lewis, S., & Akkus, O.(2016).A Point-of-Care Raman Spectroscopy–Based Device for the Diagnosis of Gout and Pseudogout: Comparison With the Clinical Standard Microscopy.Arthritis & Rheumatology,68(7),1751–1757.
