Kharangate, C., O'Neill, L., Mudawar, I., Hasan, M., Nahra, H., Balasubramaniam, R., Hall, N., Macner, A., & Mackey, J.(2015).Effects of subcooling and two-phase inlet on flow boiling heat transfer and critical heat flux in a horizontal channel with one-sided and double-sided heating.INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,91, 1187-1205.
Hunt, A., Schmidt, M., Fischer, M., & Quinn, R. D.(2015).A biologically based neural system coordinates the joints and legs of a tetrapod.Bioinspiration & biomimetics,10(5),055004.
Neilson, H., Carter, J., & Lewandowski, J. J.(2015).An improved method for calculation of elastic constants of metallic glasses.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,634, 183-187.
Webster, V., Hawley, E., Akkus, O., Chiel, H., & Quinn, R. D.(2015).Fabrication of Electrocompacted Aligned Collagen Morphs for Cardiomyocyte Powered Living Machines.Springer International Publishing.
Mirletz, B., Bhandal, P., Adams, R., Agogino, A., Quinn, R. D., & SunSpiral, V. D.(2015).Goal-Directed CPG-Based Control for Tensegrity Spines with Many Degrees of Freedom Traversing Irregular Terrain.Soft Robotics,2(4),165–176.
Nguyen, M., Li, L., Fan, Z., Gao, R. X., Smith, E. X., Ehmann, K. X., & Cao, J. X.(2015).Joining sheet metals by electrically-assisted roll bonding.,64(1),273-276.
Seifi, M., Dahar, M., Aman, R., Harrysson, O., Beuth, J., & Lewandowski, J. J.(2015).Influence of Test Orientation and Build Direction on Fracture and Fatigue Crack Propagation Behavior of As-deposited EBAM Ti-6Al-4V.Journal of Materials.
Mirletz, B., Quinn, R. D., & SunSpiral, V. D.(2015).CPGs for adaptive control of spine-like tensegrity structures.Proceedings of 2015 International Conference on Robotics and Automation (ICRA2015) Workshop on Central Pattern Generators for Locomotion Control: Pros, Cons & Alternatives.
Palmer, L., Diller, E., & Quinn, R. D.(2015).Toward Gravity-Independent Climbing Using a Biologically-Inspired Distributed Inward Gripping Strategy.IEEE Transaction on Mechatronics.
Michaels, S., Moses, K., Bachmann, R., Hamilton, R., Pena-Francesch, A., Lanba, A., Demirel, M., & Quinn, R. D.(2015).Biomimicry of the Manduca Sexta Forewing Using SRT Protein Complex for FWMAV Development.Springer.
Teixeira, P., Maia, J. M., COVAS, J. M., & Hilliou, L. M.(2015).A Small‐Scale Experimental Extrusion Set‐Up for Exploring Relationships Between Process‐Induced Structures and Characteristics of Multiphase Polymer Systems.Macromolecular Materials and Engineering,300(12),1278-1289.
Szczecinski, N., Chrzanowski, D., Cofer, D., Moore, D., Terrasi, A., Martin, J., Ritzmann, R., & Quinn, R. D.(2015).MantisBot: A Platform for Investigating Mantis Behavior via Real-Time Neural Control.Springer International Publishing.
Horchler, A., Kandhari, A., Daltorio, K., Moses, K., Andersen, K., Bunnelle, H., Kershaw, J., Tavel, W., Bachmann, R., Chiel, H., & Others, H.(2015).Worm-like robotic locomotion with a compliant modular mesh.Springer.
Ranka, T., Garcia-Sanz, M., Symmes, A., Ford, J., & Weadon, T.(2015).Dynamic analysis of the Green Bank Telescope structure and servo system.Journal of Astronomical Telescopes, Instruments and Systems,2(1),014001.
Hunt, A., Szczecinski, N., Andrada, E., Fischer, M., & Quinn, R. D.(2015).Using Animal Data and Neural Dynamics to Reverse Engineer a Neuromechanical Rat Model.Springer International Publishing.
Huang, R., Chari, P., Tseng, J., Zhang, C., Cox, M., & Maia, J. M.(2015).Microconfinement effect on gas barrier and mechanical properties of multilayer rigid/soft thermoplastic polyurethane films.Journal of Applied Polymer Science,13, 41849.
Day, J., MacDonald, D., Abboud, J., Williams, G., Rimnac, C. M., Kraay, M. M., MCloskey, R. M., Arnholt, C. M., & Kurtz, S. M.(2015).Mechanically assisted crevice corrosion damage in shoulder arthroplasty is comparable to hip arthroplasty.ASTM.
Andrade, R., Weinrich, Z., Ferreira, C., Schiraldi, D. A., & Maia, J. M.(2015).Optimization of melt blending process of nylon 6-POSS: improving mechanical properties of spun fibers.Polymer Engineering and Science,55, 1580-1588.
Horchler, A., Daltorio, K. A., Chiel, H. A., & Quinn, R. D.(2015).Designing responsive pattern generators: stable heteroclinic channel cycles for modeling and control.Bioinspiration \& biomimetics,10(2),026001.
Fredette, E., MacDonald, D., Underwood, R., Slipchenko, M., Mont, M., Lee, H., Klein, G., Rimnac, C. M., & Kurtz, S. M.(2015).Does Metal Transfer Differ on Retrieved Ceramic and CoCr Femoral Heads?.BioMed research international,2015, 283038.
Howe, D., Dunning, J., Zorman, C., Garverick, S., & Bogie, K.(2015).Development of an Integrated Surface Stimulation Device for Systematic Evaluation of Wound Electrotherapy.ANNALS OF BIOMEDICAL ENGINEERING,43(2),306-313.
Gordon, P., Gotti, D., Hegde, U., Hicks, M., Kulis, M., & Sivashinsky, G.(2015).An elementary model for autoignition of laminar jets.PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES,471(2179),-.
