Lewandowski, J. J., Wang, D. J., & Seifi, M. J.(2019).Through-thickness Inhomogeneity of Sensitization on Environmentally Assisted Cracking in AA5083-H128 Alloy.Materials Science and Engineering A,A740, 34-48.
Lin, D., Hu, C., Chen, C., Qu, J., & Dai, L.(2018).Microporous N,P-Codoped Graphitic Nanosheets as an Efficient Electrocatalyst for Oxygen Reduction in Whole pH Range for Energy Conversion and Biosensing Dissolved Oxygen.Chemistry - A European Journal,24(69),18487-18493.
Ye, P., Cao, P., Chen, Q., & Advincula, R. C.(2018).Continuous Flow Fabrication of Block Copolymer-Grafted Silica Micro-Particles in Environmentally Friendly Water/Ethanol Media.Macromolecular Materials and Engineering.
Kang, J., Takahashi, F., & T�ien, J.(2018).In situ thermal-conductivity measurements and morphological characterization of intumescent coatings for fire protection.Journal of Fire Sciences,36(5),419-437.
Bin Rusayyis, M., Schiraldi, D. A., & Maia, J. M.(2018).Property/Morphology Relationships in SEBS-Compatibilized HDPE/Poly(phenylene ether) Blends.Macromolecules,51(16),6513-6523.
Strobel, H., Hookway, T., Piola, M., Fiore, G., Soncini, M., Alsberg, E., & Rolle, M.(2018).Assembly of Tissue-Engineered Blood Vessels with Spatially Controlled Heterogeneities.Tissue Engineering.
Deans, T., Li, Y., Jefferson, L., & Schiraldi, D. A.(2018).Rapid screening test for flame retardation of wood, and its applicability to thermoplastic polymer systems: Research Article.Journal of Applied Polymer Science,135(32).
Sousa-Castillo, A., Furini, L., Tiu, B., Cao, P., Top�u, B., Comesa�a-Hermo, M., Rodr�guez-Gonz�lez, B., Baaziz, W., Ersen, O., Advincula, R. C., P�rez-Lorenzo, M. C., & Correa-Duarte, M. C.(2018).Plasmonic Retrofitting of Membrane Materials: Shifting from Self-Regulation to On-Command Control of Fluid Flow.Advanced Materials,30(35).
Takahashi, F., Katta, V., & Hicks, M.(2018).Cool-Flame Burning and Oscillations of Envelope Diffusion Flames in Microgravity.Microgravity Science and Technology,30(4),339-351.
Huang, H., Chen, X., Li, R., Fukuto, M., Schuele, D., Ponting, M., Langhe, D., & Baer, E.(2018).Flat-On Secondary Crystals as Effective Blocks To Reduce Ionic Conduction Loss in Polysulfone/Poly(vinylidene fluoride) Multilayer Dielectric Films.Macromolecules,51(14),5019-5026.
Huang, Y., Xu, J., Soulestin, T., Dos Santos, F., Li, R., Fukuto, M., Lei, J., Zhong, G., Li, Z., & Li, X.(2018).Can Relaxor Ferroelectric Behavior Be Realized for Poly(vinylidene fluoride- co -chlorotrifluoroethylene) [P(VDF�CTFE)] Random Copolymers by Inclusion of CTFE Units in PVDF Crystals?.Macromolecules,51(14),5460-5472.
Wang, Y., Song, S., Yuan, J., Pan, M., & Liu, G.(2018).Architecture and Performance of Raspberry-like Colloidal Particle Clusters via Self-Assembly of in Situ Generated Janus Particles.Industrial and Engineering Chemistry Research,57(27),8907-8917.
Nguyen, M., Jeon, O., Dang, P., Huynh, C., Varghai, D., Riazi, H., McMillan, A., Herberg, S., & Alsberg, E.(2018).RNA interfering molecule delivery from in situ forming biodegradable hydrogels for enhancement of bone formation in rat calvarial bone defects.Acta Biomaterialia,75, 105-114.
Gao, W., Wang, D., Seifi, M., & Lewandowski, J. J.(2018).Anisotropy of corrosion and environmental cracking in AA5083-H128 Al-Mg alloy.Materials Science and Engineering A,730, 367-379.
Feng, J., Zhang, G., MacInnis, K., Olah, A., & Baer, E.(2018).Structure-property relationships of microporous membranes produced by biaxial orientation of compatibilized PP/Nylon 6 blends.Polymer,145, 148-156.
Levchenko, I., Bazaka, K., Baranov, O., Sankaran, R., Nomine, A., Belmonte, T., & Xu, S.(2018).Lightning under water: Diverse reactive environments and evidence of synergistic effects for material treatment and activation.Applied Physics Reviews,5(2).
Dahar, M., Tamirisakandala, S., & Lewandowski, J. J.(2018).Evolution of fatigue crack growth and fracture behavior in gamma titanium aluminide Ti-43.5Al-4Nb-1Mo-0.1B (TNM) forgings.International Journal of Fatigue,111, 54-69.
Hassan, H., Hellier, A., Crosky, A., & Lewandowski, J. J.(2018).Fracture toughness of cast and extruded Al6061/15%Al 2 O 3 p metal matrix composites.Australian Journal of Mechanical Engineering.
Dong, B., Healy, J., Lan, S., Daniil, M., & Willard, M. A.(2018).Computational alloy design of (Co 1-x Ni x ) 88 Zr 7 B 4 Cu 1 nanocomposite soft magnets.AIP Advances,8(5).
Arnholt, C., MacDonald, D., Klein, G., Cates, H., Rimnac, C. M., Kurtz, S. M., Kocagoz, S. M., & Chen, A. M.(2018).What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?.Journal of Arthroplasty.
Martone, A., Dong, B., Lan, S., & Willard, M. A.(2018).Iron-rich (Fe 1-x-y Ni x Co y ) 88 Zr 7 B 4 Cu 1 nanocrystalline magnetic materials for high temperature applications with minimal magnetostriction.AIP Advances,8(5).
Feng, J., Zhang, Z., Bironeau, A., Guinault, A., Miquelard-Garnier, G., Sollogoub, C., Olah, A., & Baer, E.(2018).Breakup behavior of nanolayers in polymeric multilayer systems � Creation of nanosheets and nanodroplets.Polymer,143, 19-27.
Cao, P., De Leon, A., Rong, L., Yin, K., Abenojar, E., Su, Z., Tiu, B., Exner, A., Baer, E., & Advincula, R. C.(2018).Polymer Nanosheet Containing Star-Like Copolymers: A Novel Scalable Controlled Release System.Small.
Seo, J., Shin, J., Leijten, J., Jeon, O., Bal �zt�rk, A., Rouwkema, J., Li, Y., Shin, S., Hajiali, H., Alsberg, E., & Khademhosseini, A.(2018).Interconnectable Dynamic Compression Bioreactors for Combinatorial Screening of Cell Mechanobiology in Three Dimensions.ACS Applied Materials & Interfaces,10(16),13293-13303.
De Leon, A., Rodier, B., Bajamundi, C., Espera, A., Wei, P., Kwon, J., Williams, J., Ilijasic, F., Advincula, R. C., & Pentzer, E. C.(2018).Plastic Metal-Free Electric Motor by 3D Printing of Graphene-Polyamide Powder.ACS Applied Energy Materials,1(4),1726-1733.
Zaid, H., Berger, M., Jalabert, D., Walls, M., Akrobetu, R., Goble, N., Gao, X., Berger, P., Fongkaew, I., Lambrecht, W., & Sehirlioglu, A.(2018).Role of the different defects, their population and distribution in the LaAlO 3 /SrTiO 3 heterostructure's behavior.Journal of Applied Physics,123(15).
Chen, Q., Cao, P., & Advincula, R. C.(2018).Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing.Advanced Functional Materials.
Sun, M., Sun, C., Wang, Y., S�nchez-Soto, M., & Schiraldi, D. A.(2018).The Relation between the Rheological Properties of Gels and the Mechanical Properties of Their Corresponding Aerogels.Gels,4(2).
Dzugan, J., Prochazka, R., Rund, M., Podany, P., Konopik, P., Seifi, M., & Lewandowski, J. J.(2018).Effects of thickness and orientation on the small scale fracture behaviour of additively manufactured Ti-6Al-4V.Materials Characterization.
McMillan, A., Nguyen, M., Gonzalez-Fernandez, T., Ge, P., Yu, X., Murphy, W., Kelly, D., & Alsberg, E.(2018).Dual non-viral gene delivery from microparticles within 3D high-density stem cell constructs for enhanced bone tissue engineering.Biomaterials,161, 240-255.
Hernandez, C., Nieves, L., De Leon, A., Advincula, R. C., & Exner, A. C.(2018).Role of Surface Tension in Gas Nanobubble Stability Under Ultrasound.ACS Applied Materials & Interfaces,10(12),9949-9956.
Zhang, Z., & Litt, M.(2018).Nature of Ferroelectric Behavior in Main-Chain Dipolar Glass Nylons: Cooperative Segmental Motion Induced by High Poling Electric Field.Macromolecules,51(5),1967-1977.
Guo, Y., Yang, Y., & Yu, B.(2018).Influence of particle shape on the erodibility of non-cohesive soil: Insights from coupled CFD�DEM simulations.Particuology.
Seifi, M., Ghamarian, I., Samimi, P., Collins, P., Holroyd, N., & Lewandowski, J. J.(2018).Sensitization and remediation effects on environmentally assisted cracking of Al-Mg naval alloys.Corrosion Science.
Parran, K., Bechtel, C., Moore, R., Gebhart, J., Reich, M., Kraay, M., & Rimnac, C. M.(2018).Are Radiographic and Direct Measures of Acetabular Polyethylene Wear Comparable?.Journal of Arthroplasty.
Seifi, M., Dahar, M., Aman, R., Harrysson, O., Beuth, J., & Lewandowski, J. J.(2018).Correction to: Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V.JOM,70(3),436-436.
Jafary-Zadeh, M., Praveen Kumar, G., Branicio, P., Seifi, M., Lewandowski, J. J., & Cui, F. J.(2018).A Critical Review on Metallic Glasses as Structural Materials for Cardiovascular Stent Applications.Journal of Functional Biomaterials,9(1).
Huang, H., Chen, X., Yin, K., Treufeld, I., Schuele, D., Ponting, M., Langhe, D., & Baer, E.(2018).Reduction of Ionic Conduction Loss in Multilayer Dielectric Films by Immobilizing Impurity Ions in High Glass Transition Temperature Polymer Layers.ACS Applied Energy Materials,1(2),775-782.
Duval, C. E., Darge, A. E., Ruff, C. E., DeVol, T. E., & Husson, S. E.(2018).Rapid Sample Preparation for Alpha Spectroscopy with Ultrafiltration Membranes.Analytical Chemistry.
Yin, K., Lai, C., Wang, J., Ji, S., Aldridge, J., Feng, J., Olah, A., Baer, E., & Ponting, M.(2018).Bioinspired adaptive gradient refractive index distribution lens.Optical Engineering,57(2).
Al-Biloushi, M., Milliman, H., Gawryla, M., & Schiraldi, D. A.(2018).Oil absorption performance of polymer/clay aerogel materials: Research Article.Journal of Applied Polymer Science,135(6).
Zhang, Z., Wang, D., Litt, M., & Tan, L.(2018).High-Temperature and High-Energy-Density Dipolar Glass Polymers Based on Sulfonylated Poly(2,6-dimethyl-1,4-phenylene oxide).Angewandte Chemie - International Edition,57(6),1528-1531.
Gawryla, M., Arndt, E., S�nchez-Soto, M., & Schiraldi, D. A.(2018).Poly(Amide-imide) Aerogel Materials Produced via an Ice Templating Process.Materials,11(2).
Morrison, T., Moore, R., Meng, J., Rimnac, C. M., & Kraay, M. M.(2018).No Difference in Conventional Polyethylene Wear Between Yttria-stabilized Zirconia and Cobalt-chromium-molybdenum Femoral Heads at 10 Years.HSS Journal,14(1),60-66.
Lai, H., Leon, A., Pangilinan, K., & Advincula, R. C.(2018).Superoleophilic and under-oil superhydrophobic organogel coatings for oil and water separation.Progress in Organic Coatings,115, 122-129.
Luo, J., Ye, W., Ma, X., Bobanga, J., & Lewandowski, J. J.(2018).The evolution and effects of second phase particles during hot extrusion and re-extrusion of a NiTi shape memory alloy.Journal of Alloys and Compounds,735, 1145-1151.
Sun, M., Sun, C., Hostler, S., & Schiraldi, D. A.(2018).Effects of feather-fiber reinforcement on poly(vinyl alcohol)/clay aerogels: Structure, property and applications.Polymer,137, 201-208.
Li, Z., Black, T., Rahman, M., Feng, J., Olah, A., & Baer, E.(2018).Opto-mechanical programming of micro-scale information on transparent multilayer shape memory film.Polymer,137, 156-168.
Caldona, E., De Leon, A., Mangadlao, J., Lim, K., Pajarito, B., & Advincula, R. C.(2018).On the enhanced corrosion resistance of elastomer-modified polybenzoxazine/graphene oxide nanocomposite coatings.Reactive and Functional Polymers,123, 19-Oct.
Hu, J., & Yu, B.(2018).Measurement of Wavelength and Temperature-dependent Optical Properties of Thermochromic Pigments.Applied Spectroscopy,72(2),297-304.
Chen, P., Lee, C., Wang, S., Seifi, M., Lewandowski, J. J., Dahmen, K. J., Jia, H. J., Xie, X. J., Chen, B. J., Yeh, J. J., Tsai, C. J., Yuan, T. J., & Liaw, P. J.(2018).Fatigue behavior of high-entropy alloys: A review.Science in China, Series E: Technological Sciences,61(2),168-178.
Aitken, Z., Jafary-Zadeh, M., Lewandowski, J. J., & Zhang, Y. J.(2018).Anharmonic model for the elastic constants of bulk metallic glass across the glass transition.Physical Review B,97(1).
Jiang, T., Xie, Y., Dai, L., Liu, Y., & Zhao, Z.(2018).Alkylation of phenol with tert-butyl alcohol catalyzed by ionic liquid-supported MCM-41 with different pore sizes.REACTION KINETICS MECHANISMS AND CATALYSIS,125(1),351-364.
Tian, J., Zhang, T., Dai, L., Cheng, W., Yang, L., & Yuan, C.(2018).Dynamic characteristics and test analysis of a new drilling downhole tool with anti-stick-slip features.JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,32(10),4941-4949.
Edling, H., Liu, H., Sun, C., Mondschein, R., Schiraldi, D. A., Long, T. A., & Turner, S. A.(2018).Copolyesters based on bibenzoic acids.Polymer,135, 120-130.
Lewandowski, J. J., Salem, A. J., Satko, D. J., & Grylls, R. J.(2018).Effects of Post Processing on Microstructure and Mechanical Properties of SLM-Processed IN-718.The Minerals, Metals, and Materials Society (TMS).
Unal, M., Cingoz, F., Bagcioglu, C., Sozer, Y., & Akkus, O.(2018).Interrelationships between electrical, mechanical and hydration properties of cortical bone.Journal of the Mechanical Behavior of Biomedical Materials,77, 23-Dec.
Sirimamilla, P., Rimnac, C. M., & Furmanski, J. M.(2018).Viscoplastic crack initiation and propagation in crosslinked UHMWPE from clinically relevant notches up to 0.5 mm radius.Journal of the Mechanical Behavior of Biomedical Materials,77, 73-77.
Zhang, Z., Sun, J., Wang, F., & Dai, L.(2018).Efficient Oxygen Reduction Reaction (ORR) Catalysts Based on Single Iron Atoms Dispersed on a Hierarchically Structured Porous Carbon Framework.ANGEWANDTE CHEMIE-INTERNATIONAL EDITION,57(29),9038-9043.
Mangadlao, J., Lim, K., Danda, C., Dalida, M., & Advincula, R. C.(2018).House of Cards Nanostructuring of Graphene Oxide and Montmorillonite Clay for Oil-Water Separation.Macromolecular Materials and Engineering,303(1).
Seo, J., Sunshine, J., Leijten, J., Jeon, O., Camci-Unal, G., Dikina, A., Brinegar, K., Ghaemmaghami, A., Alsberg, E., & Khademhosseini, A.(2018).High-throughput approaches for screening and analysis of cell behaviors..Biomaterials,153, 85-101.
Martone, A., Lan, S., Dong, B., & Willard, M. A.(2018).Iron-Rich (Fe1-x-yNixCoy)88Zr7B4Cu1 Nanocrystalline Magnetic Materials for High Temperature Applications with Minimal Magnetostriction.AIP Advances.
De Leon, A., Mellon, M., Mangadlao, J., Advincula, R. C., & Pentzer, E. C.(2018).The pH dependent reactions of graphene oxide with small molecule thiols.RSC Advances,8(33),18388-18395.
Verma, A., French, R. H., & Carter, J. W.(2017).Physics Informed Network Models: Data Science Approach to Metals Design.Integrating Materials and Manufacturing Innovation/Springer,6(4),279–287.
Yuan, C., & Yuan, C.(2017).Ternary Porous Cobalt Phosphoselenide Nanosheets: An Efficient Electrocatalyst for Electrocatalytic and Photoelectrochemical Water Splitting.Advanced Materials.
Yuan, C., & Yuan, C.(2017).Integrated Hierarchical Cobalt Sulfide/Nickel Selenide Hybrid Nanosheets as An Efficient Three-dimensional Electrode for Electrochemical and Photoelectrochemical Water Splitting.Nano letters.
Takahashi, F., Katta, V., Linteris, G., & Babushok, V.(2017).A computational study of extinguishment and enhancement of propane cup-burner flames by halon and alternative agents.Fire Safety Journal,91, 688-694.
Parikh, H., Hilli, N., De Guire, M. R., Heuer, A. H., Liu, Z. H., & Goettler, R. H.(2017).Long-term Microstructural Changes in Solid Oxide Fuel Cell Anodes: 3D Reconstruction.J. Am. Ceram. Soc.,100(4),1653–1660.
Lang, X., Lenart, W., Sun, J., Hammouda, B., & Hore, M. J.(2017).Interaction and Conformation of Aqueous Poly (N-isopropylacrylamide)(PNIPAM) Star Polymers below the LCST.Macromolecules,50(5),2145-2154.
Huang, L., & Dai, L.(2017).Aggregation-Induced Emission for Highly Selective and Sensitive Fluorescent Biosensing and Cell Imaging.Journal of Polymer Science Part A: Polymer Chemistry,55(4),653-659.
Ishida, H., Zhang, K., Ran, Q., Arza, C., Froimowicz, P., & Ishida, H.(2017).Preparation of high purity samples, effect f purity on properties, and FT-IR, Raman, 1H and 13C NMR, and DSC data of highly purified benzoxazine monomers.Elsevier.
Ishida, H., Froimowicz, P., & Ishida, H.(2017).Development of New Generation Benzoxazine Thermosets Based on Smart ortho-Benzoxazine Chemistry and Their Molecular Understanding of the Unexpected Properties.Elsevier.
Dai, L.(2017). "Acoustic-assisted assembly of an individual monochromatic ultralong carbon nanotube for high on-current transistors".Sci. Adv. 2, e1601572, 2016.,2
Shang, K., Yang, J., Cao, Z., Liao, W., Wang, Y., & Schiraldi, D. A.(2017).Novel Polymer Aerogel toward High Dimensional Stability, Mechanical Property, and Fire Safety.ACS Applied Materials & Interfaces.
Palaganas, N., Mangadlao, J., De Leon, A., Palaganas, J., Pangilinan, K., Lee, Y., & Advincula, R. C.(2017).3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography.ACS Applied Materials & Interfaces,9(39),34314-34324.
Venkatraman, K., Dordi, Y., & Akolkar, R. N.(2017).Electrochemical Atomic Layer Deposition of Cobalt Enabled by the Surface-Limited Redox Replacement of Underpotentially Deposited Zinc.Journal of The Electrochemical Society [00134651],164(2),D104-D109.
Zangiabadi, A., Dalton, J., Wang, D., Ernst, F., & Heuer, A. H.(2017).The Formation of Martensitic Austenite during Nitridation of Stainless Steel.Materials Science and Engineering A,48, 8-13.
Lewandowski, J. J.(2017).Defect Distribution and Microstructure Heterogeneity Effects on Fracture Resistance and Fatigue Behavior of EBM Ti-6Al-4V.International Journal of Fatigue,94, 263-287.
Fongkaew, I., Akrobetu, R., Sehirlioglu, A., Voevodin, A., Limpijumnong, S., & Lambrecht, W.(2017).Core-level binding energy shifts as a tool to study surface processes on LaAlO 3 /SrTiO 3.Journal of Electron Spectroscopy and Related Phenomena,218, 21-29.
Jadbabaei, N., Slobodjian, R., Shuai, D., & Zhang, H.(2017).Catalytic Hydrogenation of 4-Nitrophenol by Palladium-Resin Composites.Applied Catalysis A: General,543C, 209-217.
Grande, C., Mangadlao, J., Fan, J., De Leon, A., Delgado-Ospina, J., Rojas, J., Rodrigues, D., & Advincula, R. C.(2017).Chitosan Cross-Linked Graphene Oxide Nanocomposite Films with Antimicrobial Activity for Application in Food Industry.Macromolecular Symposia,374(1).
Seifi, M., Salem, A., Satko, D., Ackelid, U., Semiatin, S., & Lewandowski, J. J.(2017).Effects of HIP on microstructural heterogeneity, defect distribution and mechanical properties of additively manufactured EBM Ti-48Al-2Cr-2Nb.Journal of Alloys and Compounds,729, 1118-1135.
Palaganas, J., De Leon, A., Mangadlao, J., Palaganas, N., Mael, A., Lee, Y., Lai, H., & Advincula, R. C.(2017).Facile Preparation of Photocurable Siloxane Composite for 3D Printing.Macromolecular Materials and Engineering.
Khalifa, A., Ferng, T., Shaw, G., Lewandowski, J. J., Liaw, P. J., & Zhang, Y. J.(2017).High Entropy Alloy Wires of Al0.3CoCrFeNi with High Tensile Strength and Ductility at Ambient and Cryogenic Temperature.Acta MATERIALIA,123, 285-294.
Mangadlao, J., Lim, K., Danda, C., Dalida, M., & Advincula, R. C.(2017).House of Cards Nanostructuring of Graphene Oxide and Montmorillonite Clay for Oil-Water Separation.Macromolecular Materials and Engineering.
Luo, J., Bobanga, J., & Lewandowski, J. J.(2017).Microstructural heterogeneity and texture of as-received, vacuum arc-cast, extruded, and re-extruded NiTi shape memory alloy.Journal of Alloys and Compounds,712, 494-509.
De Leon, A., Alonso, L., Mangadlao, J., Advincula, R. C., & Pentzer, E. C.(2017).Simultaneous Reduction and Functionalization of Graphene Oxide via Ritter Reaction.ACS Applied Materials & Interfaces,9(16),14265-14272.
Nourdine, A., Flandin, L., Alberola, N., Perrin, L., Planès, E., Hiltner, A., & Baer, E.(2017).Extrusion of a nano-ordered active layer for organic photovoltaic cells.Sustainable Energy Fuels,1(9),2016-2027.
Zuanetti, B., & Wang, T.(2017).A novel approach for plate impact experiments to determine the dynamic behavior of materials under extreme conditions.Journal of Dynamic Behavior of Materials,3, 64-75.
Ji, S., Wang, J., Olah, A., & Baer, E.(2017).Triple-shape-memory polymer films created by forced-assembly multilayer coextrusion.Journal of Applied Polymer Science,134(5).
Viggiano, R., Williams, J., Schiraldi, D. A., & Meador, M. A.(2017).Effect of Bulky Substituents in the Polymer Backbone on the Properties of Polyimide Aerogels.ACS Applied Materials & Interfaces.
Yuan, C., & Yuan, C.(2017).Efficient Electrochemical and Photoelectrochemical Water Splitting by a 3D Nanostructured Carbon Supported on Flexible Exfoliated-Graphene-Foil.Advanced Materials.
Kang, A., Shang, K., Ye, D., Wang, Y., Wang, E., Zhu, Z., Liao, W., Xu, S., Wang, Y., & Schiraldi, D. A.(2017).Rejuvenated fly ash in poly(vinyl alcohol)-based composite aerogels with high fire safety and smoke suppression.Chemical Engineering Journal,327, 992-999.
Manapat, J., Chen, Q., Ye, P., & Advincula, R. C.(2017).3D Printing of Polymer Nanocomposites via Stereolithography.Macromolecular Materials and Engineering.
Burnett, T., Holroyd, N., Lewandowski, J. J., Ogurreck, M. J., Grau, V. J., Kelley, R. J., Pickering, E. J., Daly, M. J., Sherry, A. J., Pawar, S. J., Slater, T. J., & Withers, P. J.(2017).Degradation of metallic materials studied by correlative tomography.IOP Conference Series: Materials Science and Engineering,219
Kowalski, B., & Sehirlioglu, A.(2017).High temperature limitation due to onset of depoling in BiScO 3 PbTiO 3.Journal of Applied Physics,121(6),064106.
Jadbabaei, N., Ye, T., Shuai, D., & Zhang, H.(2017).Development of Palladium-Resin Composites for Catalytic Hydrodechlorination of 4-Chlorophenol – Impact of Support Structures.Applied Catalysis B: Environmental,205, 576–586.
De Leon, A., Rodier, B., Luo, Q., Hemmingsen, C., Wei, P., Abbasi, K., Advincula, R. C., & Pentzer, E. C.(2017).Distinct Chemical and Physical Properties of Janus Nanosheets.ACS Nano,11(7),7485-7493.
Lavvafi, H., Lewandowski, M., Schwam, D., & Lewandowski, J. J.(2017).Effects of Surface Laser Treatments on Microstructure, Tension, and Fatigue Behavior of AISI 316LVM Biomedical Wires.Materials Science and Engineering A,A688, 101-113.
Holroyd, N., Burnett, T., Seifi, M., & Lewandowski, J. J.(2017).Improved understanding of environment-induced cracking (EIC) of sensitized 5XXX series aluminium alloys.Materials Science and Engineering A,682, 613-621.
Caldona, E., De Leon, A., Pajarito, B., & Advincula, R. C.(2017).Novel anti-corrosion coatings from rubber-modified polybenzoxazine-based polyaniline composites.Applied Surface Science,422, 162-171.
Nourdine, A., Perrin, L., Carrot, C., Baer, E., Flandin, L., & Alberola, N.(2017).Compatibility of C 60 grafted polystyrene/P3OT: Towards the extrusion of photoactive materials.European Polymer Journal,96, 1-9.
Pal, S., Alam, M., Odette, G., Maloy, S., Hoelzer, D., & Lewandowski, J. J.(2017).Microstructure, Texture and Mechanical Properties of the 14YWT Nanostructured Ferritic Alloy NFA-1.Mechanical and Creep Behavior of Advanced Materials.
Caldona, E., De Leon, A., Thomas, P., Naylor, D., Pajarito, B., & Advincula, R. C.(2017).Superhydrophobic Rubber-Modified Polybenzoxazine/SiO 2 Nanocomposite Coating with Anticorrosion, Anti-Ice, and Superoleophilicity Properties.Industrial and Engineering Chemistry Research,56(6),1485-1497.
Feng, J., Zhang, G., MacInnis, K., Olah, A., & Baer, E.(2017).Formation of microporous membranes by biaxial orientation of compatibilized PP/Nylon 6 blends.Polymer,123, 301-310.
Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., & Lewandowski, J. J.(2017).Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification.JOM,69(3),439-455.
Baer, E., Li, Z., Rahman, M., & Olah, A.(2017).Programming of Macro/Micro Scale Information on Shape Memorizing Polyvinyl Acetate Film. J. of Applied Polymer Science,134, 44659.
MacDonald, D., Chen, A., Lee, G., Klein, G., Mont, M., Kurtz, S., Cates, H., Kraay, M., & Rimnac, C. M.(2017).Fretting and Corrosion Damage in Taper Adapter Sleeves for Ceramic Heads: A Retrieval Study.Journal of Arthroplasty.
Cudjoe, E., Hunsen, M., Xue, Z., Way, A., Barrios, E., Olson, R., Hore, M. J., & Rowan, S. J.(2017).Miscanthus Giganteus: A commercially viable sustainable source of cellulose nanocrystals.Carbohydrate Polymers,155, 230 - 241.
Zhan, X., Zhang, P., Voyles, P., Liu, X., Akolkar, R. N., & Ernst, F. N.(2017).Effect of tungsten alloying on short-to-medium-range-order evolution and crystallization behavior of near-eutectic amorphous NiP.Acta Materialia,122, 400-411.
Hubilla, F., Mabilangan, A., Advincula, R. C., & Del Mundo, F. C.(2017).A Surface Plasmon Resonance Histamine Sensor Based on an Electropolymerized Molecularly Imprinted Polymer (E-MIP).MATEC Web of Conferences,95
Faber, K., Asefa, T., Backhaus-Ricoult, M., Brow, R., Chan, J., Dillon, S., Fahrenholtz, W., Finnis, M., Garay, J., García, R., Gogotsi, Y., Haile, S., Halloran, J., Hu, J., Huang, L., Jacobsen, S., Lara-Curzio, E., LeBeau, J., Lee, W., Levi, C., Levin, I., Lewis, J., Lipkin, D., Lu, K., Luo, J., Maria, J., Martin, L., Martin, S., Messing, G., Navrotsky, A., Padture, N., Randall, C., Rohrer, G., Rosenflanz, A., Schaedler, T., Schlom, D., Sehirlioglu, A., Stevenson, A., Tani, T., Tikare, V., Trolier-McKinstry, S., Wang, H., & Yildiz, B.(2017).The role of ceramic and glass science research in meeting societal challenges: Report from an NSF-sponsored workshop.Journal of the American Ceramic Society.
Zhang, H., & Wang, S.(2017).Modeling of Bi-Solute Adsorption by Polymeric Resin based on Adsorbed Solution Theories (ASTs).Environ. Sci. Technol. ,51(10),5552–5562.
Dahar, M., Tamirisakandala, S., & Lewandowski, J. J.(2017).Fatigue crack growth and fracture behavior of as-cast Ti-43.5Al-4Nb-1Mo-0.1B (TNM) compared to Ti-48Al-2Nb-2Cr (4822).Intermetallics,91, 158-168.
Zhang, G., Li, X., Tang, S., & Thompson, R.(2017).The Role of Field Electron Emission in Polypropylene/Aluminum Nanodielectrics Under High Electric Fields.ACS Applied Materials & Interfaces.
Ye, P., Cao, P., Su, Z., & Advincula, R. C.(2017).Highly efficient reversible addition-fragmentation chain-transfer polymerization in ethanol/water via flow chemistry: Highly efficient RAFT polymerization in ethanol/water.Polymer International.
Holroyd, H., Burnett, T., Seifi, M., & Lewandowski, J. J.(2017).Improved Understanding of Environment-Induced Cracking (EIC) of Sensitized 5XXX Series Aluminum Alloys.Materials Science and Engineering A,682, 613-621.
Mangadlao, J., Cao, P., Choi, D., & Advincula, R. C.(2017).Photoreduction of Graphene Oxide and Photochemical Synthesis of GrapheneMetal Nanoparticle Hybrids by Ketyl Radicals.ACS Applied Materials & Interfaces,9(29),24887-24898.
Holroyd, N., Burnett, T., Seifi, M., & Lewandowski, J. J.(2017).Pre-exposure embrittlement of a commercial Al-Mg-Mn alloy, AA5083-H131.Corrosion Reviews,35(4-5).
Wang, J., Ponting, M., Zhang, C., Olah, A., & Baer, E.(2017).Fuel filtration properties and mechanism of a novel fibrous filter produced by a melt-process.Journal of Membrane Science,526, 229-241.
Aydogan, E., Almirall, N., Odette, G., Maloy, S., Anderoglu, O., & Lewandowski, J. J.(2017).Stability of Nanosized Oxides in Ferrite under Extremely High Dose Self Ion Irradiations.Journal of Nuclear Materials,486, 86-95.
De Vos, C., Baneton, J., Witzke, M., Dille, J., Godet, S., Gordon, M., Reniers, F., & Sankaran, R.(2017).A comparative study of the reduction of silver and gold salts in water by a cathodic microplasma electrode.Journal of Physics D,50, 105206.
Ishida, H., Cassidy, F., Huang, S., & Ishida, H.(2016).Synthesis and Ring-Opening Polymerization of 2-Substituted 1,3-benzoxazine: The First Observation of the Polymerization of Oxazine Ring-Substituted Benzoxazines.Poly. Chem.,7, 7177-7184.
Zhang, J., & Dai, L.(2016).Nitrogen, Phosphorus, and Fluorine Tri-doped Graphene as a Multifunctional Catalyst for Self-Powered Electrochemical Water Splitting.Angewandte Chemie,128(42),13490-13494.
Zhang, J., & Dai, L.(2016).Nitrogen, Phosphorus, and Fluorine Tri-doped Graphene as a Multifunctional Catalyst for Self-Powered Electrochemical Water Splitting.Angewandte Chemie International Edition,55(42),13296-13300.
Hu, C., & Dai, L.(2016).Carbon-Based Metal-Free Catalysts for Electrocatalysis beyond the ORR.Angewandte Chemie International Edition,55(39),11736-11758.
Wang, D., Zhu, L., Chen, J., & Dai, L.(2016).Liquid Marbles Based on Magnetic Upconversion Nanoparticles as Magnetically and Optically Responsive Miniature Reactors for Photocatalysis and Photodynamic Therapy.Angewandte Chemie International Edition,55(36),10795-10799.
Dai, L.(2016).Structurally defined 3D nanographene assemblies via bottom-up chemical synthesis for highly efficient lithium storage".Adv. Mater. 28 (46), 10250-10256, 2016..
Wang, L., Pan, M., Song, S., Yuan, J., & Liu, G.(2016).Intriguing Morphology Evolution from Noncrosslinked Poly(tert-butyl acrylate) Seeds with Polar Functional Groups in Soap-Free Emulsion Polymerization of Styrene.Langmuir,32(31),7829-7840.
Xiang, Z., Dai, Q., Chen, J., & Dai, L.(2016).Edge Functionalization of Graphene and Two-Dimensional Covalent Organic Polymers for Energy Conversion and Storage.Advanced Materials,28(29),6253-6261.
Zhao, X., Liao, Y. T., Johnston, M. T., Tien, J. S., Ferkul, P. S., & Olson, S. S.(2016).Concurrent flame growth, spread, and quenching over composite fabric samples in low speed purely forced flow in microgravity.Proceedings of the Combustion Institute,36(2),2971-2978.
Dai, L.(2016)."A facile route to bimetal and nitrogen-codoped 3D porous graphitic carbon networks for efficient oxygen reduction".Small, 12, 4193-4199, 2016..
Navas, P., Yu, R., López-Querol, S., & Li, B.(2016).Dynamic consolidation problems in saturated soils solved through u–w formulation in a LME meshfree framework.Computers and Geotechnics [0266352X],79, 55-72.
Navas, P., Li, B., & Yu, R.(2016).Meshfree Modelling of Dynamic Fracture in High-Strength Concrete.International Conference on Fracture Mechanics of Concrete and Concrete Structures.
Yin, K., Zhou, Z., Schuele, D., Wolak, M., & Baer, E.(2016).Effects of Interphase Modification and Biaxial Orientation on Dielectric Properties of Poly(ethylene terephthalate)/Poly(vinylidene fluoride- co -hexafluoropropylene) Multilayer Films.ACS Applied Materials & Interfaces [19448244],8(21),13555-13566.
Seifi, M., Christiansen, D., Harrysson, O., Beuth, J., & Lewandowski, J. J.(2016).Process Mapping and Fracture and Fatigue Behavior of Ti-6Al-4V made by Additive Manufacturing.TMS-International Conference on Ti Alloys.
Seifi, M., Ghamarian, I., Samimi, P., Ackelid, A., Collins, P., & Lewandowski, J. J.(2016).Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Produced via Electron Beam Melting.TMS-International Conference on Ti Alloys.
Wang, Y., Gok, A., Fagerholm, C., & Bruckman, L.(2016).Development of predictive and semi-gSEM models of backsheet degradation under multi-factor accelerated weathering exposure.SPE-Antec Proceedings 2016.
Dai, L.(2016)."Identification of catalytic sites for oxygen reduction and oxygen evolution in N-doped graphene bifunctional electrocatalysts".Sci. Adv. 2, e1501122, 2016.,2
Xu, L., Jiang, Q., Xiao, Z., Li, X., Huo, J., Wang, S., & Dai, L.(2016).Plasma-Engraved Co3O4Nanosheets with Oxygen Vacancies and High Surface Area for the Oxygen Evolution Reaction.Angewandte Chemie International Edition,55(17),5277-5281.
Ishida, H., R. Arza, C., & Ohashi, S.(2016).Tailor-made and chemically designed synthesis of coumarin-containing benzoxazines and their reactivity study toward their thermosets.Journal of Polymer Science, Polymer Chemistry,54, 1428-1435.
Ishida, H.(2016).Simple and Low Energy Consuming Synthesis of Cyanate-ester Functional Naphthoxazines and Their Properties.Polymer Chemistry,7, 2245-2252.
Dai, L.(2016).Scalable fabrication of nanoporous carbon fiber films as bifunctional catalytic electrodes for flexible Zn-air batteries".Adv. Mater. 2016, 28, 3000–3006.
Fan, X., Chang, D., Chen, X., Baek, J., & Dai, L.(2016).Functionalized graphene nanoplatelets from ball milling for energy applications.Current Opinion in Chemical Engineering,11, 52-58.
Uhde-Holzem, K., McBurney, M., Tiu, B., Advincula, R. C., Fischer, R. C., Commandeur, U. C., & Steinmetz, N. C.(2016).Production of Immunoabsorbent Nanoparticles by Displaying Single-Domain Protein A on Potato Virus X..Macromolecular bioscience,16(2),231-41.
Seifi, M., Holroyd, H., & Lewandowski, J. J.(2016).Deformation Rate and Sensitization Effects on Environmentally Assisted Cracking.Corrosion,72(2),264-283.
Ishida, H., Liu, L., Howlin, B., Ishida, H., & Hamerton, I.(2016).Examining the influence of bisphenol A on the polymerization and network properties of an aromatic benzoxazine.Polymer International,88, 52-62.
Dai, L.(2016)."Flexible and wearable wire-shaped microsupercapacitors based on highly aligned titania and carbon nanotubes".Energy Storage Materials, 2, 21-26, 2016..
Dou, M., He, D., Shao, W., Liu, H., Wang, F., & Dai, L.(2016).Pyrolysis of Animal Bones with Vitamin B12: A Facile Route to Efficient Transition Metal-Nitrogen-Carbon (TM-N-C) Electrocatalysts for Oxygen Reduction.Chemistry - A European Journal,22(9),2896-2901.
Mansour, J. M., Lee, Z. M., & Welter, J. M.(2016).Nondestructive Techniques to Evaluate the Characteristics and Development of Engineered Cartilage..Annals of biomedical engineering.
Yin, K., Zhou, Z., Schuele, D., Wolak, M., & Baer, E.(2016).Effects of Interphase Modification and Biaxial Orientation on Dielectric Properties of Poly(ethylene terephthalate)/Poly(vinylidene fluoride- co -hexafluoropropylene) Multilayer Films.ACS Applied Materials & Interfaces [19448244],8(21),13555-13566.
Mendible, G., Kazmer, D., Gao, R. X., & Johnston, S. X.(2016).Estimation of Bulk Melt-Temperature from In-Mold Thermal Sensors for Injection Molding, Part B: Validation.International Polymer Processing The Journal of the Polymer Processing Society [0930777X],31(3),278-284.
Kortshagen, U., Sankaran, R., Pereira, R., Girschick, S., Wu, J., & Aydil, E.(2016).Nonthermal plasma synthesis of nanocrystals: Fundamental principles, materials, and applications.Chemical Reviews,116, 11061-11127.
Baer, E., Wang, J., Ayyar, R., & Olan, A.(2016).Processing-Structure-Property Relationships of Novel Fibrous Filters Produced by a Melt-Process.J. Materials Science,51, 188.
Sun, C., Schiraldi, D. A., Chen, D. A., Wang, D. A., & Sánchez-Soto, M. A.(2016).Tough Polymer Aerogels Incorporating a Conformal Inorganic Coating for Low Flammability and Durable Hydrophobicity.ACS Applied Materials & Interfaces [19448244],8(20),13051-13057.
Dai, L.(2016).One-dimensional (1D) [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanorods as an efficient additive for improving the efficiency and stability of perovskite solar cells".J. Mater. Chem. A, 4, 8566-8572, 2016..
Maiorana, A., Yue, L., Manas-Zloczower, I., & Gross, R.(2016).Structure-property relationships of a bio-based reactive diluent in a bio-based epoxy resin.Journal of Applied Polymer Science [00218995],133(45).
Rao, K., Ferguson, M., Murphy, K., Zhao, J., Lacks, D. J., & Akolkar, R. N.(2016).Electrochemical characterization of micro-cracks in polyurethane resin films deposited on metallic surfaces.Journal of Applied Electrochemistry,46(12),1237-1243.
Wang, D., Chen, C., Kahn, H., Ernst, F., & Heuer, A. H.(2016).Isothermal Martensite-to-Austenite Phase Transformation in Interstitially-hardened 17-7PH Stainless Steel.Metallurgical and Materials Transactions A.
Froimowicz, P., R. Arza, C., Han, L., & Ishida, H.(2016).Cover Picture: Smart, Sustainable, and Ecofriendly Chemical Design of Fully Bio-Based Thermally Stable Thermosets Based on Benzoxazine Chemistry (ChemSusChem 15/2016).ChemSusChem [18645631],9(15),1898-1898.
CARSON, S., Maia, J. M., & COVAS, J. M.(2016).A New Extensional Mixing Element for Improved Dispersive Mixing in Twin-Screw Extrusion, Part 2: Experimental Validation for Immiscible Polymer Blends: RESEARCH ARTICLE.Advances in Polymer Technology [07306679].
Froimowicz, P., Zhang, K., & Ishida, H.(2016).Intramolecular Hydrogen Bonding in Benzoxazines: When Structural Design Becomes Functional.Chemistry - A European Journal [09476539],22(8),2691-2707.
Ock, H., Kim, D., Ahn, K., Lee, S., & Maia, J. M.(2016).Effect of organoclay as a compatibilizer in poly(lactic acid) and natural rubber blends.European Polymer Journal [00143057],76, 216-227.
Froimowicz, P., R. Arza, C., Han, L., & Ishida, H.(2016).Smart, Sustainable, and Ecofriendly Chemical Design of Fully Bio-Based Thermally Stable Thermosets Based on Benzoxazine Chemistry.ChemSusChem [18645631],9(15),1921-1928.
Yamoum, C., Maia, J. M., & Magaraphan, R. M.(2016).Rheological and thermal behavior of PLA modified by chemical crosslinking in the presence of ethoxylated bisphenol A dimethacrylates: Rheological and Thermal Behaviors of PLA with Bis-EMA Crosslinking.Polymers for Advanced Technologies [10427147],28(1),102-112.
Wang, M., Li, B., Jiang, C., & Li, Q.(2016).High efficiency organic photovoltaic devices based on isoindigo conjugated polymers with a thieno[3,2-b]thiophene p-bridge.Journal of Materials Chemistry A [20507488],4(41),16064-16072.
Ghosh, S., Ostrowski, E., Yang, R., Debnath, D., Zorman, C., & Sankaran, R.(2016).Atmospheric-pressure plasma reduction of metal cation-containing polymer films to produce electrically conductive nanocomposites by an electrodiffusion mechanism.Plasma Chemistry Plasma Processing.
Rafique, S., Han, L., Neal, A., Mou, S., Tadjer, M., French, R. H., & Zhao, H. H.(2016).Heteroepitaxy of N-type ß-Ga 2 O 3 thin films on sapphire substrate by low pressure chemical vapor deposition.Applied Physics Letters [00036951],109(13).
Seifi, M., Salem, A., Satko, D., Shaffer, J., & Lewandowski, J. J.(2016).Defect distribution and microstructure heterogeneity effects on fracture resistance and fatigue behavior of EBM Ti–6Al–4V.International Journal of Fatigue [01421123],94, 263-287.
Zhang, Z., & Litt, M.(2016).Unified Understanding of Ferroelectricity in n -Nylons: Is the Polar Crystalline Structure a Prerequisite?.Macromolecules [00249297],49(8),3070-3082.
Ono, S., Usui, S., Kim, S., Tanaka, K., Advincula, R. C., & Usui, H. C.(2016).Effect of Reactive Self-Assembled Monolayer at the Anode Interface of Organic Light-Emitting Diode.Journal of Nanoscience and Nanotechnology [15334880],16(4),3407-3413.
Wang, J., Olah, A., & Baer, E.(2016).Continuous micro-/nano-fiber composites of polyamide 6/polyethylene oxide with tunable mechanical properties using a novel co-extrusion technique.Polymer [00323861],82, 166-171.
Pangilinan, K., De Leon, A., Mangadlao, J., Baer, E., & Advincula, R. C.(2016).Grafting of a Stimuli Responsive Polymer on Nanolayered Coextruded PS/PCL Films by Surface Initiated Polymerization.Macromolecular Materials and Engineering [14387492],301(7),870-875.
Shaver, A., Yin, K., Borjigin, H., Zhang, W., Choudhury, S., Baer, E., Mecham, S., Riffle, J., & McGrath, J.(2016).Fluorinated poly(arylene ether ketone)s for high temperature dielectrics.Polymer [00323861],83, 199-204.
Dai, L.(2016). "Edge-functionalization of graphene and two-dimensional covalent organic polymers for energy conversion and storage".Adv. Mater. 28, 6253-6261, 2016..
Qiang, Z., Gurkan, B., Ma, J., Liu, X., Guo, Y., Cakmak, M., Cavicchi, K., & Vogt, B.(2016).Roll-to-roll fabrication of high surface area mesoporous carbon with process-tunable pore texture for optimization of adsorption capacity of bulky organic dyes.Microporous and Mesoporous Materials,227, 57–64.
Grabinski, C., Sharma, M., Maurer, E., Sulentic, C., Hussain, S., & Sankaran, R.(2016).The effect of shear flow on nanoparticle agglomeration and deposition in in vitro dynamic flow models.Nanotoxicology,10, 74-83.
Choi, C., Song, M., Kim, D., & Yu, B.(2016).A New Non-Destructive TDR System Combined with a Piezoelectric Stack for Measuring Properties of Geomaterials.Materials [19961944],9(6).
Pangilinan, K., De Leon, A., & Advincula, R. C.(2016).Polymers for proppants used in hydraulic fracturing.Journal of Petroleum Science and Engineering [09204105],145, 154-160.
Baer, E., Wu, H., Zhang, J., Zhang, C., Feng, J., & Rahman, M.(2016).Structure-Properties Relationship of a Novel Multilayer Film/Foam Material Produced through Co-extrusion and Orientation.J. Industrial @ Eng. Chem. Research ,55, 10947-10954.
Dai, L.(2016). "Preparation of microvillus-like nitrogen-doped carbon nanotubes as the cathode of a microbial fuel cell".J. Mater. Chem. A, 4, 1632-1636, 2016.,4
Chen, T., & Dai, L.(2016).Flexible and wearable wire-shaped microsupercapacitors based on highly aligned titania and carbon nanotubes.Energy Storage Materials,2, 21-26.
Zhukhovitskiy, A., Zhao, J., Zhong, M., Keeler, E., Alt, E., Teichen, P., Griffin, R., Hore, M. J., Willard, A. J., & Johnson, J. J.(2016).Polymer Structure Dependent Hierarchy in PolyMOC Gels.Macromolecules [00249297],49(18),6896-6902.
Shen, X., Wang, A., Sankaran, R., & Lacks, D. J.(2016).First-principles calculation of contact electrification and validation by experiment.Journal of Electrostatics [03043886],82, 16-Nov.
Yuan, D., Pedrazzoli, D., Pircheraghi, G., & Manas-Zloczower, I.(2016).Melt Compounding of Thermoplastic Polyurethanes Incorporating 1D and 2D Carbon Nanofillers.Polymer - Plastics Technology and Engineering [03602559].
Kowalski, B., Sayir, A., & Sehirlioglu, A.(2016).Aliovalent MnTi and GaTi substitution in high temperature piezoelectric (x)Bi(Zn0.5Zr0.5)O3 – (y)BiScO3 – (100-x-y)PbTiO3,.J. Mater. Sci.,51(14),6761.
Banik, S., Rao, K., & Akolkar, R. N.(2016).Determination of the Diffusion-Adsorption Properties of Polymeric Electrolyte Additives Using an Additive Injection Method Implemented on a Rotating Disc Electrode.Journal of The Electrochemical Society [00134651],163(9),E241-E247.
Miller, D., Annigoni, E., Ballion, A., Bokria, J., Bruckman, L., Burns, D., Chen, X., Feng, J., Fowler, S., & Others, S.(2016).Degradation in PV Encapsulant Strength of Attachment: An Interlaboratory Study Towards a Climate-Specific Test: Preprint.NREL (National Renewable Energy Laboratory (NREL), Golden, CO (United States)).
Bai, S., Du, L., Sun, J., Luo, R., Li, D., Chen, A., & Liu, C.(2016).Preparation of reduced graphene oxide/Co 3 O 4 composites and sensing performance to toluene at low temperature.RSC Advances [20462069],6(65),60109-60116.
Kumar Rao, K., Ferguson, M., Murphy, K., Zhao, J., Lacks, D. J., & Akolkar, R. N.(2016).Electrochemical characterization of micro-cracks in polyurethane resin films deposited on metallic surfaces.J. Appl. Electrochem,46, 1237.
Knothe Tate, M., Detamore, M., Capadona, J. R., Woolley, A. R., & Knothe, U. R.(2016).Engineering and commercialization of human-device interfaces, from bone to brain.Biomaterials [01429612],95, 35-46.
Wan Hassan, W., Liu, L., Howlin, B., Ishida, H., & Hamerton, I.(2016).Examining the influence of bisphenol A on the polymerisation and network properties of an aromatic benzoxazine.Polymer [00323861],88, 52-62.
Zhang, H., Lamnawar, K., Maazouz, A., & Maia, J. M.(2016).A nonlinear shear and elongation rheological study of interfacial failure in compatible bilayer systems.Journal of Rheology [01486055],60(1),23-Jan.
Altfeder, I., Lee, H., Hu, J., Naguy, R., Sehirlioglu, A., Reed, A., Voevodin, A., & Eom, C.(2016).Scanning tunneling microscopy of an interfacial two-dimensional electron gas in oxide heterostructures.Physical Review B [10980121],93(11).
Gadley, J., Andrade, R., & Maia, J. M.(2016).Effect of Soft-to-Hard Segment Ratio on Viscoelastic Behavior of Model Thermoplastic Polyurethanes during Phase Transitions.Macromolecular Materials and Engineering [14387492],301(8),953-963.
Yu, K., Hayman, C., Manjunath, S., Fan, W., Martin, I., Martin, H., & Sankaran, R.(2016).A combined CFD modeling and experimental study of pyrolytic carbon deposition.Diamond and Related Materials [09259635],70, 173-178.
Allahyarov, E., & Löwen, H.(2016).Dipole correlation effects on the local field and the effective dielectric constant in composite dielectrics containing high-k inclusions.Physical Chemistry Chemical Physics [14639076],18(28),19103-19117.
Ohashi, S., Cassidy, F., Huang, S., Chiou, K., & Ishida, H.(2016).Synthesis and ring-opening polymerization of 2-substituted 1,3-benzoxazine: the first observation of the polymerization of oxazine ring-substituted benzoxazines.Polymer Chemistry [17599954],7(46),7177-7184.
Zhang, G., Brannum, D., Dong, D., Tang, L., Allahyarov, E., Tang, S., Kodweis, K., & Lee, J.(2016).Interfacial Polarization-Induced Loss Mechanisms in Polypropylene/BaTiO 3 Nanocomposite Dielectrics.Chemistry of Materials [08974756],28(13),4646-4660.
Eifler, J., Podgornik, R., Steinmetz, N., French, R. H., Parsegian, V. H., & Ching, W. H.(2016).Charge distribution and hydrogen bonding of a collagen a 2 -chain in vacuum, hydrated, neutral, and charged structural models: Charge Distribution and HB of a Collagen a 2 -Chain.International Journal of Quantum Chemistry [00207608],116(9),681-691.
Babushok, V., Linteris, G., Katta, V., & Takahashi, F.(2016).Influence of hydrocarbon moiety of DMMP on flame propagation in lean mixtures.Combustion and Flame [00102180],171, 168-172.
Yuan, J., Zhao, W., & Pan, M.(2016).Self-Assembled Colloidal Particle Clusters from In Situ Pickering-Like Emulsion Polymerization via Single Electron Transfer Mechanism.Macromolecular Rapid Communications [10221336],37(15),1282-1287.
Vergara, A., Pernites, R., Tiu, B., De Leon, A., Mangadlao, J., Binag, C., & Advincula, R. C.(2016).Capacitive Detection of Morphine via Cathodically Electropolymerized, Molecularly Imprinted Poly( p -aminostyrene) Films.Macromolecular Chemistry and Physics [10221352],217(16),1810-1822.
Peshek, T., Fada, J., Hu, Y., Xu, Y., Elsaeiti, M., Schnabel, E., Köhl, M., & French, R. H.(2016).Insights into metastability of photovoltaic materials at the mesoscale through massive I–V analytics.Journal of Vacuum Science and Technology B Microelectronics and Nanometer Structures [21662746],34(5).
Aydogan, E., Pal, S., Anderoglu, O., Maloy, S., Vogel, S., Odette, G., Lewandowski, J. J., Hoelzer, D. J., Anderson, I. J., & Rieken, J. J.(2016).Effect of tube processing methods on the texture and grain boundary characteristics of 14YWT nanostructured ferritic alloys.Materials Science and Engineering A [09215093],661, 222-232.
Park, J., & Advincula, R. C.(2016).Electroluminescent Behaviors of Electrochemically Cross-Linkable Poly(benzyl ether) Terthiophene Dendrimers.Macromolecular Chemistry and Physics [10221352],217(17),1948-1954.
Baer, E., Shanzuo, J., Wang, J., & Olah, A.(2016).Correlation between Experimental and Simulated Shape Deformation of a Bio-inspired Tunable Polymer Lens.J. Materials Science and Technology Research,3, 1-6.
Dai, L.(2016)."Aligned nanofibers from polypyrrole/Graphene as electrodes for regeneration of optic nerve via electrical stimulation".ACS Appl. Mater. & Interfaces, 8, 6834−6840, 2016..
Kortshagen, U., Sankaran, R., Pereira, R., Girshick, S., Wu, J., & Aydil, E.(2016).Nonthermal Plasma Synthesis of Nanocrystals: Fundamental Principles, Materials, and Applications.Chemical Reviews [00092665],116(18),11061-11127.
De Leon, A., Chen, Q., Palaganas, N., Palaganas, J., Manapat, J., & Advincula, R. C.(2016).High performance polymer nanocomposites for additive manufacturing applications.Reactive and Functional Polymers [13815148],103, 141-155.
Bilici, M., Haase, J., Boyle, C., Go, D., & Sankaran, R.(2016).The smooth transition from field emission to a self-sustained plasma in microscale electrode gaps at atmospheric pressure.Journal of Applied Physics,119, 223301.
Tao, J., & Yu, B.(2016).Bio-inspired directional sensor with piezoelectric microfiber and helical electrodes.Journal of Intelligent Material Systems and Structures [1045389X],27(13),1755-1766.
Shang, K., Liao, W., Wang, J., Wang, Y., Wang, Y., & Schiraldi, D. A.(2016).Nonflammable Alginate Nanocomposite Aerogels Prepared by a Simple Freeze-Drying and Post-Cross-Linking Method.ACS Applied Materials & Interfaces [19448244],8(1),643-650.
Tiu, B., Krupadam, R., & Advincula, R. C.(2016).Pyrene-imprinted polythiophene sensors for detection of polycyclic aromatic hydrocarbons.Sensors and Actuators, B: Chemical [09254005],228, 693-701.
Toth, J., Lacks, D. J., & Sankaran, R. J.(2016).Direct conversion of methane by an atmospheric-pressure dielectric barrier discharge microplasma.IEEE International Conference on Plasma Science (ICOPS).
Patel, A., Maiorana, A., Yue, L., Gross, R., & Manas-Zloczower, I.(2016).Curing Kinetics of Biobased Epoxies for Tailored Applications.Macromolecules [00249297],49(15),5315-5324.
Wen, A., Lee, K., Cao, P., Pangilinan, K., Carpenter, B., Lam, P., Veliz, F., Ghiladi, R., Advincula, R. C., & Steinmetz, N. C.(2016).Utilizing Viral Nanoparticle/Dendron Hybrid Conjugates in Photodynamic Therapy for Dual Delivery to Macrophages and Cancer Cells.Bioconjugate Chemistry [10431802],27(5),1227-1235.
Kravchenko, O., Misiego, R., Kravchenko, S., Pipes, R., & Manas-Zloczower, I.(2016).Modeling of Hierarchical Morphology of Carbon Nanotube Bundles in Polymer Composites.Macromolecular Theory and Simulations [10221344],25(6),524-532.
Boehme, L., & Landau, U.(2016).Rapid screening of plating additives for bottom-up metallization of nano-scale features.Journal of Applied Electrochemistry,46(1),39-46.
Salman, A., & Li, Y.(2016).Age-dependent fragility and life-cycle cost analysis of wood and steel power distribution poles subjected to hurricanes.Structure and Infrastructure Engineering,12(8),890–903.
Pedrazzoli, D., & Manas-Zloczower, I.(2016).Understanding phase separation and morphology in thermoplastic polyurethanes nanocomposites.Polymer [00323861],90, 256-263.
Venkatraman, K., Gusley, R., Yu, L., Dordi, Y., & Akolkar, R. N.(2016).Electrochemical Atomic Layer Deposition of Copper: A Lead-Free Process Mediated by Surface-Limited Redox Replacement of Underpotentially Deposited Zinc.Journal of The Electrochemical Society [00134651],163(12),D3008-D3013.
Kahn, H., Ernst, F., & Heuer, A. H.(2016).Increasing the Coefficient of Sliding Friction of NiCr at Low Loads by Interstitial Surface Hardening.Wear,346, 1-5.
Fang, Y., Dulaney, A., Gadley, J., Maia, J. M., & Ellison, C. M.(2016).A comparative parameter study: Controlling fiber diameter and diameter distribution in centrifugal spinning of photocurable monomers.Polymer [00323861],88, 102-111.
Zhao, M., Yu, L., Akolkar, R. N., & Anderson, A. N.(2016).Mechanism of Electroless Copper Deposition from [Cu II EDTA] 2– Complexes Using Aldehyde-Based Reductants.Journal of Physical Chemistry C [19327447],120(43),24789-24793.
Ecker, M., Danda, V., Shoffstall, A., Mahmood, S., Joshi-Imre, A., Frewin, C., Ware, T., Capadona, J. R., Pancrazio, J. R., & Voit, W. R.(2016).Sterilization of Thiol-ene/Acrylate Based Shape Memory Polymers for Biomedical Applications.Macromolecular Materials and Engineering [14387492].
Isarov, S., Lee, P., Towslee, J., Hoffman, K., Davis, R., Maia, J. M., & Pokorski, J. K.(2016).DNA as a flame retardant additive for low-density polyethylene.Polymer [00323861],97, 504-514.
Zhou, H., Gawlik, A., Hernandez, C., Goss, M., Mansour, J. M., & Exner, A. M.(2016).Nondestructive Characterization of Biodegradable Polymer Erosion in Vivo Using Ultrasound Elastography Imaging.ACS Biomaterials Science & Engineering [23739878],2(6),1005-1012.
Situ, S., Cao, J., Chen, C., Abenojar, E., Maia, J. M., & Samia, A. M.(2016).Reactive Extrusion Strategies to Fabricate Magnetite-Polyethylene Nanocomposites with Enhanced Mechanical and Magnetic Hyperthermia Properties.Macromolecular Materials and Engineering [14387492],301(12),1525-1536.
Nie, Z., Wang, G., McGuffin-Cawley, J. D., Narayanan, B. D., Zhang, S. D., Schwam, D. D., Kottman, M. D., & Rong, Y. D.(2016).Experimental Study and Modeling of H13 Steel Deposition Using Laser Hot-Wire Additive Manufacturing.Journal of Materials Processing Technology [09240136],235, 171-186.
(2016).Characterization of Thin Film Lead Zirconate Titanate (PZT) Multimode Piezoelectric Cantilevers Vibrating in Ultrasonic Band.Proc. 2016 IEEE International Frequency Control Symposium (IFCS).
Arza, C., Froimowicz, P., & Ishida, H.(2016).Triggering effect caused by elemental sulfur as a mean to reduce the polymerization temperature of benzoxazine monomers.RSC Advances [20462069],6(42),35144-35151.
Fada, J., Wheeler, N., Zabiyaka, D., Goel, N., Peshek, T., & French, R. H.(2016).Democratizing an electroluminescence imaging apparatus and analytics project for widespread data acquisition in photovoltaic materials.Review of Scientific Instruments [00346748],87(8).
Li, X., Ho, J., Wang, J., Li, Z., & Zhong, G.(2016).Understanding Nonlinear Dielectric Properties in a Biaxially Oriented Poly(vinylidene fluoride) Film at Both Low and High Electric Fields.ACS Applied Materials & Interfaces [19448244],8(1),455-465.
Tiu, B., Pernites, R., Tiu, S., & Advincula, R. C.(2016).Detection of aspartame via microsphere-patterned and molecularly imprinted polymer arrays.Colloids and Surfaces A: Physicochemical and Engineering Aspects [09277757],495, 149-158.
Gbur, J., & Lewandowski, J. J.(2016).Fatigue and fracture of wires and cables for biomedical applications.International Materials Reviews [09506608],61(4),231-314.
Seifi, M., Ghamarian, I., Samimi, P., Ackelid, A., Collins, P., & Lewandowski, J. J.(2015).Grain Orientation Effects on Grain Boundary Delamination During Fatigue of a Sensitized Al-Mg Alloy.Philosophical Magazine Letters,95(11),526-533.
Emami, Z., Meng, Q., Pircheraghi, G., & Manas-Zloczower, I.(2015).Use of surfactants in cellulose nanowhisker/epoxy nanocomposites: effect on filler dispersion and system properties.CELLULOSE,22(5),3161-3176.
Maxian, O., Pedrazzoli, D., & Manas-Zloczower, I.(2015).Modeling the electrical percolation behavior of hybrid nanocomposites based on carbon nanotubes and graphene nanoplatelets.Materials Research Express,2(9).
Carter, J. W., Sosa, J. W., Shade, P. W., Hamish, F. W., Michael, U. W., & Michael, M. W.(2015).The Potential Link Between High Angle Grain Boundary Morphology and Grain Boundary Deformation in a Nickel-based Superalloy.Materials Science and Engineering A,640, 280-286.
Yi, J., Wang, W., & Lewandowski, J. J.(2015).Guiding and Deflecting Cracks in Bulk Metallic Glasses to Increase Damage Tolerance.Advanced Engineering Materials.
Pircheraghi, G., Foudazi, R., & Manas-Zloczower, I.(2015).Methods for Evaluation of Carbon Nanotube Dispersion at Different Length Scales.Powder Technology,276, 222-231.
Mahanta, N., Loos, M., Abramson, A. R., & Manas-Zloczower, I. R.(2015).Graphite-Graphene Hybrid Filler System for High Thermal Conductivity of Epoxy Composites.Journal of Materials Research,30, 959-966.
Kottman, M., Zhang, S., McGuffin-Cawley, J. D., Denney, P. D., & Narayanan, B. D.(2015).Laser Hot Wire Process: A Novel Process for Near-Net Shape Fabrication for High-Throughput ApplicationsJOM, DOI: 10.1007/s11837-014-1288-1, published online Jan 21, 2015..Laser Hot Wire Process: A Novel Process for Near-Net Shape Fabrication for High-Throughput Applications,67(3),622-928.
Baer, E., Jurczuk, K., Galeski, A., Mackey, M., & Hiltner, A.(2015).Orientation of PVDF.....Crystals in Nanolayered Films.J. Colloid Polymer Science,293, 1289.
Allahyarov, E., & Loewen, H.(2015).A simulation study of the electrostriction effects in dielectric elastomer composites containing polarizable inclusions with different spatial distributions.Physical Chemistry Chemical Physics,17(48),32479-32497.
Zhang, K., Liu, L., Ohashi, S., Liu, X., Han, Z., & Ishida, H.(2015).Synthesis of High Thermal Stability Polybenzoxazoles via Ortho-Imide-Functional Benzoxazine Monomers.JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY,53(11),1330-1338.
Andrade, R., Weinrich, Z., Ferreira, C., Schiraldi, D. A., & Maia, J. M.(2015).Optimization of melt blending process of nylon 6-POSS: improving mechanical properties of spun fibers.Polymer Engineering and Science,55, 1580-1588.
Ishida, H., & Ishida, H.(2015).Copolymers Based on Telechelic Benzoxazine with Reactive Main-chain and Anhydride: Monomer and Polymer Synthesis, and thermal and Mechanical Properties of Carbon Fiber Composites.RSC Advances,5, 16785-16791.
Seifi, M., Dahar, M., Zamani, H., Harrysson, O., Beuth, J., & Lewandowski, J. J.(2015).Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V.JOM,67(3),597-607.
Ghosh, S., Liu, T., Bilici, M., Cole, J., Huang, I., Staack, D., Mariotti, D., & Sankaran, R.(2015).Atmospheric-pressure dielectric barrier discharge with capillary injection for gas-phase nanoparticle synthesis.JOURNAL OF PHYSICS D-APPLIED PHYSICS,48(31),-.
Li, X., Tang, S., Pan, M., Zhong, G., & Li, Z.(2015).Polymorphic Extended-Chain and Folded-Chain Crystals in Poly(vinylidene fluoride) Achieved by Combination of High Pressure and Ion-Dipole Interaction.Macromolecules,48(23),8565-8573.
Hore, M. J., Ye, X. J., Ford, J. J., Gao, Y. J., Fei, J. J., Wu, Q. J., Rowan, S. J., Composto, R. J., Murray, C. J., & Hammouda, B. J.(2015).Probing the Structure, Composition, and Spatial Distribution of Ligands on Gold Nanorods.NANO LETTERS,15(9),5730-5738.
Sun, X., Zhang, L., Dai, Q., & Yu, B.(2015).Investigation of internal curing effects on microstructure and permeability of interface transition zones in cement mortar with SEM imaging, transport simulation and hydration modeling techniques.CONSTRUCTION AND BUILDING MATERIALS,76, 366-379.
Wang, D., Kurish, B., Treufeld, I., & Tansu, N.(2015).Synthesis and Characterization of High Nitrile Content Polyimides as Dielectric Films for Electrical Energy Storage.JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY,53(3),422-436.
Baer, E., Rahman, M., Andrade, R., & Maia, J.(2015).Viscosity Contrast Effects on the Structure-Property Relationship of Multilayer Soft Film/Foams.POLYMER,69, 110.
Peshek, T., Bruckman, L., Schuetz, M., & French, R. H.(2015).Design Considerations and Measured Performance of Nontracked Mirror-Augmented Photovoltaics.IEEE Journal of Photovoltaics,PP(99),1–9.
Yu, L., Vashaei, Z., Ernst, F., & Akolkar, R. N.(2015).Electroless Copper Deposition on Ruthenium: Effect of Additive on Growth, Coalescence and Roughness EvolutionElectroless Copper Deposition on Ruthenium: Effect of Additive on Growth, Coalescence and Roughness Evolution.Journal of the Electrochemical Society,163, D374-D378.
Sridharan, A., Nguyen, J., Capadona, J. R., & Muthuswamy, J. R.(2015).Compliant intracortical implants reduce strains and strain rates in brain tissue in vivo.,12(3),-.
Li, R., & Feke, D. L.(2015).Rheological and kinetic study of the ultrasonic degradation of locust bean gum in aqueous saline and salt-free solutions.Ultrasonics Sonochemistry,27, 334-338.
Ghoniem, N., Sehirlioglu, A., Neff, A., Allain, J., Williams, B., & Sharghi-Moshtaghin, R.(2015).Sputtering of molybdenum and tungsten nano rods and nodules irradiated with 150 eV argon ions.APPLIED SURFACE SCIENCE,331, 299-308.
Huang, R., Silva, J., Huntington, B., Patz, J., Andrade, R., Yin, K., Cox, M., Bonnecaze, R., & Maia, J. M.(2015).Co-Extrusion Layer Multiplication of Rheologically Mismatched Polymers: A Novel Processing Route.International Polymer Processing,3, 317-330.
Jamali, S., Boromand, A., Khani, S., Wagner, N., Yamanoi, M., & Maia, J. M.(2015).Generalized Mapping of Multi-Body Dissipative Particle Dynamics onto Fluid Compressibility and the Flory-Huggins Theory.Journal of Chemical Physics,142, 164902.
Thubsuang, U., Ishida, H., Wongkasemjit, S., & Chaisuwan, T.(2015).Advanced and economical ambient drying method for controlled mesopore polybenzoxazine-based carbon xerogels: Effects of non-ionic and cationic surfactant on porous structure.JOURNAL OF COLLOID AND INTERFACE SCIENCE,459, 241-249.
Jamali, S., Boromand, A., Wagner, N., & Maia, J. M.(2015).Microstructure and rheology of soft to rigid shear-thickening colloidal suspensions.Journal of Rheology,59(6),1377-1395.
Franco, V., Beron, F., Pirota, K., Knobel, M., & Willard, M. A.(2015).Characterization of the magnetic interactions of multiphase magnetocaloric materials using first-order reversal curve analysis.JOURNAL OF APPLIED PHYSICS,117(17),-.
Silva, J., Andrade, R., Huang, R., Liu, L., Cox, M., & Maia, J. M.(2015).Rheological behavior and structure development in Thermoplastic Polyurethanes under Uniaxial Extensional Flow.Journal of Non-Newtonian Fluid Mechanics,222, 96-103.
Seifi, M., Polinkovsky, A., Yong, Z., Liaw, P., & Lewandowski, J. J.(2015).Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys.JOM,67(10),2288-2295.
Nystrom, M., Roine, J., Murtomaa, M., Sankaran, R., Santos, H., & Salonen, J.(2015).Solid state transformations in consequence of electrospraying – a novel polymorphic form of piroxicam.European Journal of Pharmaceutics and Biopharmaceutics,89, 182.
Yang, J., Cao, Z., Wang, Y., & Schiraldi, D. A.(2015).Ammonium polyphosphate-based nanocoating for melamine foam towards high flame retardancy and anti-shrinkage in fire.POLYMER,66, 86-93.
Yin, K., Ji, S., Fein, H., Ponting, M., Olah, A., & Baer, E.(2015).Evaluation of high temperature polymers in nanolayered films and gradient refractive index (GRIN) lenses.,132(44),-.
Zhang, G., Xu, Y., MacInnis, K., & Baer, E.(2015).The structure-property relationships of LLDPE-EVOH blend films fabricated by multiplication extrusion.,57, 117-124.
Kovach, K., LaBarbera, M., Moyer, M., Cmolik, B., Van Lunteren, E., Gupta, A., Capadona, J. R., & Potkay, J. R.(2015).In vitro evaluation and in vivo demonstration of a biomimetic, hemocompatible, microfluidic artificial lung.,15(5),1366-1375.
Niu, W., Li, Z., Ernst, F., & Lillard, R.(2015).The Mechanism of Passivity in Austenitic Stainless Steel AISI 316L Carburized to Colossal Super Saturation.Electrochimica Acta,176, 410-419.
Ellis, D., Carter, J. W., & Ferry, M. W.(2015).A Statistical Study of the Effects of Processing Upon the Creep Properties of GRCop-84.MATERIALS SCIENCE AND ENGINEERING A,640, 1-15.
Li, R., & Feke, D. L.(2015).Rheological and kinetic study of the ultrasonic degradation of xanthan gum in aqueous solutions.Food Chemistry,172, 808-813.
Carson, S., COVAS, J., & Maia, J. M.(2015).A New Extensional Static Mixer Concept for Improved Dispersive Mixing in Twin-screw Extrusion. Part 1: Design and Validation.Advanced in Polymer Technology.
Shukla, S., Eber, F., Nagarajan, A., DiFranco, N., Schmidt, N., Wen, A., Eiben, S., Twyman, R., Wege, C., & Steinmetz, N.(2015).The Impact of Aspect Ratio on the Biodistribution and Tumor Homing of Rigid Soft-Matter Nanorods.Advanced healthcare materials,4(6),874–882.
Zhang, F., Lamnawar, K., Maia, J. M., & Maazouz, A. M.(2015).Experimental considerations on the step shear strain in polymer melts: sources of error and windows of confidence.Rheologica Acta,54, 121-138.
Fang, Y., Dulaney, A., Gadley, J., Maia, J. M., & Ellison, C. M.(2015).Manipulating characteristic timescales and fiber morphology in simultaneous centrifugal spinning and photopolymerization.POLYMER,73, 42-51.
Schimelman, J., Dryden, D., Poudel, L., Krawiec, K., Ma, Y., Podgornik, R., Parsegian, V., Denoyer, L., Ching, W., Steinmetz, N., & French, R. H.(2015).Optical properties and electronic transitions of DNA oligonucleotides as a function of composition and stacking sequence.Physical Chemistry Chemical Physics,17(6),4589–4599.
Zhang, K., & Ishida, H.(2015).An anomalous trade-off effect on the properties of smart ortho-functional benzoxazines.POLYMER CHEMISTRY,6(13),2541-2550.
Liu, L., Scott, C., Winroth, S., Maia, J. M., & Ishida, H. M.(2015).Copolymers based on telechelic benzoxazine with a reactive main-chain and anhydride: monomer and polymer synthesis, and thermal and mechanical properties of carbon fiber composites.RSC Advances,5, 16785-16791.
Neilson, H., Carter, J., & Lewandowski, J. J.(2015).An improved method for calculation of elastic constants of metallic glasses.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,634, 183-187.
Lee, H., & Maia, J. M.(2015).The effect of strain-hardening on the morphology and mechanical and dielectric properties of multi-layered PP foam/PP film.POLYMER,70, 173-182.
Yuan, J., Wang, L., Pan, M., Wang, W., Liu, Y., & Liu, Y.(2015).Nonspherical Nanoparticles with Controlled Morphologies via Seeded Surface-Initiated Single Electron Transfer Radical Polymerization in Soap-Free Emulsion.LANGMUIR,31(14),4087-4095.
Yi, J., Wang, W., & Lewandowski, J. J.(2015).Sample size and preparation effects on the tensile ductility of Pd-based metallic glass nanowires.ACTA MATERIALIA,87, 1-7.
Rumbach, P., Bartels, D., Sankaran, R., & Go, D.(2015).The effect of air on solvated electron chemistry at a plasma/liquid interface.Journal of Physics D,48, 424001.
Hu, J., Gao, S., & Yu, B.(2015).Characterization of the Optical and Mechanical Properties of Innovative Multifunctional Thermochromic Asphalt Binders.JOURNAL OF MATERIALS IN CIVIL ENGINEERING,27(5),-.
Yang, L., Barnholtz-Sloan, J., Allahyarov, E., & Shanmuganathan, K.(2015).Semicrystalline Structure Dielectric Property Relationship and Electrical Conduction in a Biaxially Oriented Poly(vinylidene fluoride) Film under High Electric Fields and High Temperatures.ACS APPLIED MATERIALS & INTERFACES,7(36),19894-19905.
Jurczuk, K., Galeski, A., Mackey, M., Hiltner, A., & Baer, E.(2015).Orientation of PVDF alpha and gamma crystals in nanolayered films.,293(4),1289-1297.
Baer, E., Shanzuo, J., Olah, A., Rahman, M., & Li, Z.(2015).Triple Shape Memory Materials Frabricated by Forced Assembly Multilayer Film Coextrusion Technology.SPE-ANTEC 2015.
Michaels, S., Moses, K., Bachmann, R., Hamilton, R., Pena-Francesch, A., Lanba, A., Demirel, M., & Quinn, R. D.(2015).Biomimicry of the Manduca Sexta Forewing Using SRT Protein Complex for FWMAV Development.Springer.
Capadona, J. R.(2015).Reducing the "Stress": Antioxidative Therapeutic and Material Approaches May Prevent Intracortical Microelectrode Failure.,4(3),275-279.
Wang, D., Chen, C., Dalton, J., Yang, F., Sharghi-Moshtaghin, R., Kahn, H., Ernst, F., Williams, R., McComb, D., & Heuer, A. H.(2015).“Colossal” Interstitial Supersaturation in Delta Ferrite in Stainless Steels I. Low-Temperature Carburization.Acta Materialia,86, 193-207.
Neilson, H., Carter, J. W., & Lewandowski, J. J.(2015).An improved method for calculation of elastic constants of metallic glasses.Materials Science and Engineering A,634, 183-187.
Teixeira, P., Maia, J. M., COVAS, J. M., & Hilliou, L. M.(2015).A Small‐Scale Experimental Extrusion Set‐Up for Exploring Relationships Between Process‐Induced Structures and Characteristics of Multiphase Polymer Systems.Macromolecular Materials and Engineering,300(12),1278-1289.
Nayagam, V., Dietrich, D., Hicks, M., & Williams, F.(2015).Cool-flame, extinction during n-alkane droplet combustion in microgravity.COMBUSTION AND FLAME,162(5),2140-2147.
Mirletz, H., Peterson, K., & Martin, I.(2015).Degradation of transparent conductive oxides: Interfacial engineering and mechanistic insights.Solar Energy Materials and Solar Cells,143, 529-538.
Huang, R., Chari, P., Tseng, J., Zhang, C., Cox, M., & Maia, J. M.(2015).Microconfinement effect on gas barrier and mechanical properties of multilayer rigid/soft thermoplastic polyurethane films.Journal of Applied Polymer Science,13, 41849.
Wu, C., Tang, L., & De Guire, M. R.(2014).Nanocrystalline ceria coatings on solid oxide fuel cell anodes: the role of organic surfactant pretreatments on coating microstructures and sulfur tolerance.Beilstein Journal of Nanotechnology,5, 1712–1724.
Wang, H., De Guire, M. R., Agnew, G. R., Goettler, R. R., Liu, Z. R., Xing, Z. R., & Heuer, A. H.(2014).Manganese oxide formation in lanthanum strontium manganite-yttria-stabilized zirconia SOFC cathodes.Metallurgical and Materials Transactions E: Materials for Energy Systems,1(3),263-271.
Shih, S., Sharghi-Moshtaghin, R., De Guire, M. R., Goettler, R. R., Xing, Z. R., Liu, Z. R., & Heuer, A. H.(2011).Mn Valence Determination for Lanthanum Strontium Manganite Solid Oxide Fuel Cell Cathodes.J. Electrochem. Soc.,156(10),B1276-B1280.
Kokotov, M., Feldman, Y., Avishai, A., De Guire, M. R., & Hodes, G. R.(2011).Chemical Bath Deposition of CdS Highly Textured, Columnar Films.Thin Solid Films,519, 6388-6393.
