Refereed Journals

Recent Refereed Articles

  • L. Yue, M. Amirkhosravi, K. Ke, T. Gray and I. Manas-Zloczower, 2021, “Cellulose nanocrystals: accelerator and reinforcing filler for epoxy vitrimerization”, ACS Applied Materials & Interfaces, DOI: 10.1021/acsami.0c19350.
  • X. Gong, Z. Sang, H. Guo, K. Ke, I. Manas-Zloczower and D. L. Feke, 2021, “Piezoresistive Strain Sensors Based on Psyllium-Carbon Nanostructure Skeletons”, Composites Part B, accepted.
  • K. Rohm, V. Solouki Bonab, I. Manas-Zloczower, 2020, “In-situ TPU/graphene nanocomposites: correlation between filler aspect ratio and phase morphology”, Polymer Engineering & Science, accepted.
  • B. Zhao, K. Rohm, F. Wang, X. Gong, I. Manas-Zloczower, D.L. Feke, 2020, “A Compact Volume-Expandable Sorbent (CVES) for Oil and Solvent Capture”, ACS Applied Polymer Materials, https://dx.doi.org/10.1021/acsapm.0c0132
  • K. Ke, L. Yue, H. Shao, M. Yang, W. Yang, I. Manas-Zloczower, 2020, “Boosting Electrical and Piezoresistive Properties of Polymer Nanocomposites via Hybrid Carbon Fillers: A Review”, Carbon, https://doi.org/10.1016/j.carbon.2020.11.070.
  • X. Gong, K. Rohm, Z. Su, B. Zhao, J. Renner, I. Manas-Zloczower and D. L. Feke, 2020, “Porous hydrogels templated from soy-protein-stabilized high internal phase emulsions”, Journal of Materials Science, 55, 17284–17301.
  • X. Gong, B. Zhao, I. Manas-Zloczower and D. L. Feke, 2020, “Effect of Curing Bath Conditions on the Morphology and Structure of Poly(High Internal Phase Emulsion) Fibers", Journal of Applied Polymer Science, 2020;e50019. https://doi.org/10.1002/app.50019.
  • M. Amirkhosravi, I. Manas-Zloczower, 2020, “Designing Thermal Annealing to Control Mechanical Performance of Thermoplastic Polyurethane Elastomers”, Polymer, accepted.
  • M. Amirkhosravi, L. Yue, I. Manas-Zloczower, 2020, “Dusting Thermoplastic Polyurethane Granules with Carbon Nanotubes toward Highly Stretchable Conductive Elastomer Composites”, ACS Applied Polymer Materials, DOI: 10.1021/acsapm.0c00666.
  • L. Yue, M. Amirkhosravi, X. Gong, T. G. Gray, I.Manas-Zloczower, 2020, “Recycling Epoxy by Vitrimerization: Influence of an Initial Thermoset Chemical Structure”, ACS Sustainable Chemistry + Engineering, DOI: 1021/acssuschemeng.0c04815. 
  • B. Zhao, G. Gedler, I. Manas-Zloczower, S. Rowan and D.L.Feke, 2020, “Fluid transport in open-cell polymeric foams: effect of morphology and surface wettability”, SN Applied Sciences, 2020, 2, 189, https://doi.org/10.1007/s42452-020-1983-1.
  • L. Yue, H. Gao, A. Kennedy, A. Patel, X. Gong, T. Ju, T. Gray and I. Manas-Zloczower, 2020, “Vitrimerization: Converting thermoset polymers into vitrimers”, ACS Macro Letters, 9, 836-842.
  • K. Rohm, V. Solouki and I. Manas-Zloczower, 2020, “Quantifying dispersion and distribution of fillers in polymer composites using a refined Shannon entropy”, Composites Science & Technology, 197, 108276.
  • K. Rohm, M. Amirkhosravi and I. Manas-Zloczower, 2020, “Microstructure and Tribological Properties of TPU/Fluoropolymer Composites”, International Polymer Processing Journal, accepted.
  • K. Ke, Z. Sang, and Ica Manas-Zloczower, 2020, “Hybrid Systems of 3D Carbon Nanostructures with Low Dimensional Fillers for Piezoresistive Sensors”, Polymer Composites, 2020, 41(2), 468, https://doi.org/10.1002/pc.25380.
  • D. Yuan, K. Ke and I. Manas-Zloczower, 2020, “Recyclable Conductive Epoxy Composites with Segregated Filler Network Structure for EMI Shielding and Strain Sensing”, Composites part A, DOI: 10.1016/j.compositesa.2020.105837.
  • H. Guo, L. Yue, G. Rui and .I. Manas-Zloczower, 2020,” Recycling EVA (Poly ethylene-vinyl acetate) with improved properties through dynamic crosslinking”, Macromolecules, 53 (1), 458-464.
  • K. Rohm, I. Manas-Zloczower and D.L.Feke, 2019, “Poly(HIPE) morphology, crosslink density, and mechanical properties influenced by surfactant concentration and composition”, Colloids and Surfaces A,583, 123913.
  • A. Patel, S. Mekala, O.G. Kravchenko, T. Yilmaz, D. Yuan, R. Gross and I. Manas-Zloczower, 2019, “Design and formulation of a completely biobased epoxy structural adhesive”, ACS Sustainable Che. Eng., 7(19), 16382-16391.
  • Y. Qiang, A. Patel and I. Manas-Zloczower, 2019, “Enhancing Microfibrillated Cellulose Reinforcing Efficiency in Epoxy Composites by Graphene Oxide Crosslinking”, Cellulose, DOI :10.1007/s10570-019-02916-w.
  • O. Bijaisoradat, L. Yue, I. Manas-Zloczower and H. Manuspyia, 2020, “Wood flour-high density polyethylene composites: influence of silanization and esterification on mechanical properties”, Journal of Applied Polymer Science, 138 (15), 50197.
  • O. Kravchenko, V. Solouki and I. Manas-Zloczower, 2019, “Spray Assisted Microwave Welding of Thermoplastics using Carbon Nanostructures with Enabled Health Monitoring”, Polymer Engineering & Science, 59 (11), 2247-2254.
  • Z. Seng, H. Guo, K. Ke and I. Manas-Zloczower, 2019, “Effect of Solvent on Segregated Network Morphology in Elastomer Composites for Tunable Piezoresistivity” ,Macromolecular Materials and Engineering, https://doi.org/10.1002/mame.201900278.
  • Z. Seng, K. Ke and I. Manas-Zloczower, 2019, “Hybrid Systems of 3D Carbon Nanostructures with Low Dimensional Fillers for Piezoresistive Sensors”, Composites Part B: Engineering, https://doi.org/10.1002/pc.25380.
  • D. Yuan, V. Solouki Bonab, A. Patel, T. Yilmaz, R.A Gross, and I. Manas-Zloczower, 2020, “Design Strategy for Self-Healing Epoxy Coatings”, Coatings 2020, 10(1), 50; doi:10.3390/coatings10010050
  • Z. Seng, K. Ke and I. Manas-Zloczower, 2019, “Design Strategy for Porous Composites Aimed at Pressure Sensor Application”, Small, 1903487.
  • K. Ke, M. McMaster, W. Christopherson, K. D. Singer, I. Manas-Zloczower, 2019, “Highly sensitive capacitive pressure sensors based on elastomer composites with carbon filler hybrids”, Composites part A, 126,105614.
  • K. Ke, M. McMaster, W. Christopherson, K. D. Singer, I. Manas-Zloczower, 2019, “Effects of branched carbon nanotubes and graphene nanoplatelets on dielectric properties of thermoplastic polyurethane at different temperatures”, Composites Part B, 166, 673-680.
  • R. Foudazi, B. Zhao, P. Gokun, D. L. Feke, S. Rowan, I. Manas-zloczower, 2019, “The Effect of Hydrodynamic Shear on the Evolution of Morphology in High Internal Phase Emulsions (HIPEs), ACS Applied Polymer Materials, accepted.
  • Z. Sang, K. Ke, I. Manas-Zloczower, 2019, “Elastomer Composites with Tailored Interface Network toward Tunable Piezoresistivity: Effect of Elastomer Particle Size”, ACS Applied Polymer Materials, 1 (4), 714-721.
  • K. Ke, Z. Sang, I. Manas-Zloczower, 2019, “Stretchable Elastomer Composites with Segregated Filler Network: Effect of Carbon Nanofiller Dimensionality”, Nanoscale Advances, 1, 2337-2347.
  • D. Yuan, S. Delpierre, K, Ke, JM, Raquez, P, Dubois and I. Manas-Zloczower, 2019, “Biomimetic water-responsive self-healing epoxy with tunable properties “, ACS Advanced Materials & Interfaces, 11, 19, 17853-17862.
  • Z. Sang, K. Ke and I. Manas-Zloczower, 2019, “Effect of carbon nanotube morphology on properties in thermoplastic elastomer composites for strain sensors”, Composites A, 121, 207-212.
  • Yue, F. Liu, S. Mekala, A. Patel, R. Gross and I. Manas-Zloczower, 2019, “High performance biobased epoxy nanocomposite reinforced with bacterial cellulose nanofiber network”, ACS Sustainable Chemistry & Engineering, 7 (6), 5986-5992, DOI 10.1021/acssuschemeng.8b06073
  • V. Solouki Bonab, O. Maxian and I. Manas-Zloczower, 2019, “Carbon nanofiller networks- a comparative study of networks formed by branched versus straight carbon nanotubes in thermoplastic polyurethane”, Polymer, 175, 227-234.
  • Z. Sang, K. Ke and I. Manas-Zloczower, 2018, “Interface Design Strategy for the Fabrication of Highly Stretchable Strain Sensors”, ACS Applied Materials & Interfaces, 10(42), 36483-36492.
  • O. G. Kravchenko, D. Pedrazzoli, V. Solouki Bonab and Ica Manas-Zloczower, 2018, “Conductive Interlaminar Interfaces for Structural Health Monitoring in Composite Laminates under Fatigue Loading”, Materials and Design, 160, 1217-1225.
  • V. Solouki Bonab, V. Karimkhani and I. Manas-Zloczower, 2019, “Ultra-fast self-healing covalent adaptive polyurethane networks”, Macromolecular Materials and Engineering, 304, 1800405, https://doi.org/10.1002/mame.201800405.
  • K. Ke, V. Solouki Bonab, D. Yuan and I. Manas-Zloczower, 2018, “Piezoresistive Thermoplastic Polyurethane Nanocomposites with Carbon Nanostructures”, Carbon, 139, 52-58.
  • D. Yuan, V. Solouki, A. Patel and I. Manas-Zloczower, 2018, “Self-healing epoxy coatings with enhanced properties and facile processability”, Polymer, 147, 196-201, DOI: 10.1016/j.polymer.2018.06.017
  • M. S. McMaster, T E. Yilmaz, A. Patel, A. Maiorana, I. Manas-Zloczower, R.Gross, K. D. Singer, 2018, “Dielectric Properties of Bio-Based Diphenolate Ester Epoxies”, ACS Applied Materials and Interfaces, 10 (16), 13924-13930.
  • Patel, O.G. Kravchenko and I. Manas-Zloczower, 2018, “Effect of curing rate on the microstructure and macroscopic properties of epoxy fiberglass composites”, Polymers, 10(2), 125; doi:10.3390/polym10020125.
  • L.Yue, V. Solouki Bonab, D. Yuan, A. Patel, V. Karimkhani, I. Manas-Zloczower, 2019, “Vitrimerization: a novel concept to reprocess and recycle thermoset waste”, Global Challenges, Vol 3(7), 10.1002/gch2.201800076.
  • O. G. Kravchenko, G. Gedler, S. G. Kravchenko, D. L. Feke and I. Manas-Zloczower, 2018, “Modeling Compressive Behavior of Open-Cell Polymerized High Internal Phase Emulsions: Effects of Density and Morphology” Soft Matter, 14, 1637-1646.
  • L. Yue, A. Maiorana, F. Khelifa, A. Patel, J-M. Raquez, L. Bonnaud, R. Gross, P. Dubois and I. Manas-Zloczower, 2018, “Surface- modified cellulose nanocrystals for biobased epoxy nanocomposites”, Polymer, 134, 3, 155-162.
  • V. Solouki Bonab, I. Manas-Zloczower, 2017, “Revisiting Thermoplastic Polyurethane (TPU), from composition to morphology and properties”, Journal of Polymer Science: Part B Polymer Physics, Volume 55(20), 1553–1564.
  • L. Yue, A. Maiorana, A. Patel, R. A. Gross, I. Manas-Zloczower, 2017, “A Sustainable Alternative to Current Epoxy Resin Matrices for Vacuum Infusion Molding”, Composites Part A, 100, 269-274.
  • X. Qian, O. G. Kravchenko, D. Pedrazzoli, I. Manas-Zloczower, 2018, “Effect of Polycarbonate Film Surface Finish and Plasma Treatment on Mode I and II Fracture Toughness of Interleaved Composite Laminates”, Composites Part A: Applied Science and Manufacturing, 105, 138-149, DOI:10.1016/j.compositesa.2017.11.016.
  • O. G. Kravchenko, X. Qian, R. Misiego, S. G. Kravchenko, R. B. Pipes, I. Manas-Zloczower, 2017, “Role of Hierarchical Morphology of Helical Carbon Nanotube Bundles on Thermal Expansion of Polymer Nanocomposites”, Journal of Materials Research, 32(14), 2738-2746.
  • O. G. Kravchenko, D. Pedrazzoli, D. Kovtun, X. Qian, I. Manas-Zloczower, 2018, “Incorporation of Plasma-Functionalized Carbon Nanostructures in Composite Laminates for Interlaminar Reinforcement and Delamination Crack Monitoring”, Journal of Physics and Chemistry of Solids, 112, 163-170.
  • D. Varghai, A. Maiorana, Q. Meng, R. Gross, I. Manas-Zloczower, 2016, “Sustainable, Electrically-conductive Bioepoxy Nanocomposites”, Polymer, 107(19), 292-301.
  • O. G. Kravchenko, R. Misiego, S. G. Kravchenko, R. B. Pipes, I. Manas-Zloczower, 2016, “Modeling of Hierarchical Morphology of Carbon Nanotube Bundles in Polymer Composites”, Macromolecular Theory and Simulations, DOI: 10.1002/mats.201600064.
  • Patel, A. Maiorana, L. Yue, R. A. Gross, I. Manas-Zloczower, 2016, “Curing Kinetics of Biobased Epoxies for Tailored Applications”, Macromolecules, 49 (15), 5315–5324.
  • O. Maxian, D. Pedrazzoli, I. Manas-Zloczower, 2017, “Conductive polymer foams with carbon nanofillers – Modeling percolation behavior”, Polymer Express, 11 (5), 406-418.
  • D. Yuan, D. Pedrazzoli, G. Pircheraghi, I. Manas-Zloczower, 2016, “Melt compounding of thermoplastic polyurethanes incorporating 1D and 2D carbon nanofillers”, Polymer–Plastics Technology and Engineering Journal, doi.org/10.1080/03602559.2016.1233265.
  • V. Solouki Bonab, I. Manas-Zloczower, 2016, “Chemorheology of Thermoplastic Polyurethane and Thermoplastic Polyurethane/Carbon Nanotube Composite Systems”, Polymer, 99, 513-520. 
  • Maiorana, L. Yue, I. Manas-Zloczower and R. Gross, 2016, “Structure Property Relationships of a Bio-Based Reactive Diluent in a Bio-Based Epoxy Resin”, Journal of Applied Polymer Science, 133 (45) J. APPL. POLYM. SCI. 2016,DOI:10.1002/APP.4363543635.
  • D. Yuan, D. Pedrazzoli, I. Manas-Zloczower, 2016, “Synergistic effects in thermoplastic polyurethanes incorporating hybrid carbon nanofillers”, International Polymer Processing, 31(5), 554-562.
  • D. Pedrazzoli, I. Manas-Zloczower, 2016, “Understanding phase separation and morphology in thermoplastic polyurethanes nanocomposites”, Polymer, 90, 256-263.
  • G. Pircheraghi, T. Powell, V. Solouki Bonab, I. Manas-Zloczower, 2016, “Effect of carbon nanotube dispersion and network formation on thermal conductivity of thermoplastic polyurethane / carbon nanotube nanocomposites”, Polymer Engineering and Science, Volume 56(4), 394–407.