Kravchenko, O., Qian, X., Kravchenko, S., Misiego, R., Pipes, R., & Manas-Zloczower, I.(2017).Role of hierarchical morphology of helical carbon nanotube bundles on thermal expansion of polymer nanocomposites.Journal of Materials Research,32(14),2738-2746.
Chen, X., Tseng, J., Treufeld, I., Mackey, M., Schuele, D., Li, R., Fukuto, M., & Baer, E.(2017).Enhanced dielectric properties due to space charge-induced interfacial polarization in multilayer polymer films.JOURNAL OF MATERIALS CHEMISTRY C,5(39),10417-10426.
Lin, C., Griffin, P., Chao, H., Hore, M. J., Ohno, K. J., Clarke, N. J., Riggleman, R. J., Winey, K. J., & Composto, R. J.(2017).Grafted polymer chains suppress nanoparticle diffusion in athermal polymer melts.The Journal of Chemical Physics,146(20).
Kim, S., Jordan, A., Korley, L. T., & Pokorski, J. K.(2017).Drawing in poly(e-caprolactone) fibers: tuning mechanics, fiber dimensions and surface-modification density.Journal of Materials Chemistry B.
Caldona, E., De Leon, A., Pajarito, B., & Advincula, R. C.(2017).Novel anti-corrosion coatings from rubber-modified polybenzoxazine-based polyaniline composites.Applied Surface Science,422, 162-171.
Wang, J., Ponting, M., Zhang, C., Olah, A., & Baer, E.(2017).Fuel filtration properties and mechanism of a novel fibrous filter produced by a melt-process.Journal of Membrane Science,526, 229-241.
Gu, Y., Kawamoto, K., Zhong, M., Chen, M., Hore, M. J., Jordan, A. J., Korley, L. T., Olsen, B. T., & Johnson, J. T.(2017).Semibatch monomer addition as a general method to tune and enhance the mechanics of polymer networks via loop-defect control.Proceedings of the National Academy of Sciences of the United States of America.
Oliveira, J., Kotzebue, L., Ribeiro, F., Mota, B., Zampieri, D., Mazzetto, S., Ishida, H., & Lomonaco, D.(2017).Microwave-assisted solvent-free synthesis of novel benzoxazines: A faster and environmentally friendly route to the development of bio-based thermosetting resins: ARTICLE.Journal of Polymer Science, Part A: Polymer Chemistry,55(21),3534-3544.
Alexander, S., Matolyak, L., & Korley, L. T.(2017).Intelligent Nanofiber Composites: Dynamic Communication between Materials and Their Environment.Macromolecular Materials and Engineering.
Caldona, E., De Leon, A., Thomas, P., Naylor, D., Pajarito, B., & Advincula, R. C.(2017).Superhydrophobic Rubber-Modified Polybenzoxazine/SiO 2 Nanocomposite Coating with Anticorrosion, Anti-Ice, and Superoleophilicity Properties.Industrial and Engineering Chemistry Research,56(6),1485-1497.
Matolyak, L., Keum, J., Van de Voorde, K., & Korley, L. T.(2017).Synthetic approach to tailored physical associations in peptide-polyurea/polyurethane hybrids.Organic and Biomolecular Chemistry,15(36),7607-7617.
Cyphert, E., & Von Recum, H.(2017).Emerging technologies for long-term antimicrobial device coatings: advantages and limitations.Experimental Biology and Medicine.
Viggiano, R., Williams, J., Schiraldi, D. A., & Meador, M. A.(2017).Effect of Bulky Substituents in the Polymer Backbone on the Properties of Polyimide Aerogels.ACS Applied Materials & Interfaces.
Rivera-Delgado, E., Nam, J., & Von Recum, H.(2017).Localized Affinity-Based Delivery of Prinomastat for Cancer Treatment.ACS Biomaterials Science & Engineering.
Meemusaw, M., Maia, J. M., Jamieson, A. M., & Magaraphan, R. M.(2017).Structural changes in HDPE produced by in-line plasma-pretreated reactive extrusion.Materials Chemistry and Physics,199, 34-42.
Kang, A., Shang, K., Ye, D., Wang, Y., Wang, E., Zhu, Z., Liao, W., Xu, S., Wang, Y., & Schiraldi, D. A.(2017).Rejuvenated fly ash in poly(vinyl alcohol)-based composite aerogels with high fire safety and smoke suppression.Chemical Engineering Journal,327, 992-999.
Flanagan, C., Unal, M., Akkus, O., & Rimnac, C. M.(2017).Raman spectral markers of collagen denaturation and hydration in human cortical bone tissue are affected by radiation sterilization and high cycle fatigue damage.Journal of the Mechanical Behavior of Biomedical Materials,75, 314-321.
Maia, J. M.(2017).Environmental and technical feasibility of cellulose nanocrystal manufacturing from sugarcane bagasse.Carbohydrate Polymers,28, 518-529.
Palaganas, N., Mangadlao, J., De Leon, A., Palaganas, J., Pangilinan, K., Lee, Y., & Advincula, R. C.(2017).3D Printing of Photocurable Cellulose Nanocrystal Composite for Fabrication of Complex Architectures via Stereolithography.ACS Applied Materials & Interfaces,9(39),34314-34324.
Baer, E., Advincula, R. C., Mangadlao, J. C., & Xu, H. C.(2017).In Situ Photogeneration of Palladium Nanoparticles in Thermoplastic Polyurethane: Photopatterning and Enhanced Oxygen Barrier Property.Macromolecular Chemistry and Physics,218, 1700289.
Yue, L., Maiorana, A., Patel, A., Gross, R., & Manas-Zloczower, I.(2017).A sustainable alternative to current epoxy resin matrices for vacuum infusion molding.Composites Part A: Applied Science and Manufacturing,100, 269-274.
Grande, C., Mangadlao, J., Fan, J., De Leon, A., Delgado-Ospina, J., Rojas, J., Rodrigues, D., & Advincula, R. C.(2017).Chitosan Cross-Linked Graphene Oxide Nanocomposite Films with Antimicrobial Activity for Application in Food Industry.Macromolecular Symposia,374(1).
