Bergström, J., Rimnac, C. M., & Kurtz, S. M.(2005).Molecular chain stretch is a multiaxial failure criterion for conventional and highly crosslinked UHMWPE..Journal of orthopaedic research : official publication of the Orthopaedic Research Society,23(2),367-75.
Taki, N., Tatro, J., Nalepka, J., Togawa, D., Goldberg, V., Rimnac, C. M., & Greenfield, E. M.(2005).Polyethylene and titanium particles induce osteolysis by similar, lymphocyte-independent, mechanisms..Journal of orthopaedic research : official publication of the Orthopaedic Research Society,23(2),376-83.
Stawarz, A., Kayacan, R., & Rimnac, C. M.(2004).The effect of gamma radiation sterilization on the fatigue crack propagation resistance of human cortical bone..The Journal of bone and joint surgery. American volume,86-A(12),2648-57.
Taki, N., Goldberg, V., Kraay, M., & Rimnac, C. M.(2004).Backside wear of Miller-Galante I and Insall-Burstein II tibial inserts..Clinical orthopaedics and related research.
Bergström, J., Rimnac, C. M., & Kurtz, S. M.(2004).An augmented hybrid constitutive model for simulation of unloading and cyclic loading behavior of conventional and highly crosslinked UHMWPE..Biomaterials,25(11),2171-8.
Pavone, V., Youm, T., Baldini, T., Rimnac, C. M., Wright, T. M., & Sculco, T. M.(2004).Bilateral cobalt alloy femoral component fracture: a case report..American journal of orthopedics (Belle Mead, N.J.),33(4),185-9.
Schmitt, S., Krzypow, D., & Rimnac, C. M.(2004).The effect of moisture absorption on the fatigue crack propagation resistance of acrylic bone cement..Biomedizinische Technik. Biomedical engineering,49(3),61-5.
Collier, M., Kraay, M., Rimnac, C. M., & Goldberg, V. M.(2003).Evaluation of contemporary software methods used to quantify polyethylene wear after total hip arthroplasty..The Journal of bone and joint surgery. American volume,85-A(12),2410-8.
Kurtz, S., Hozack, W., Marcolongo, M., Turner, J., Rimnac, C. M., & Edidin, A. M.(2003).Degradation of mechanical properties of UHMWPE acetabular liners following long-term implantation..The Journal of arthroplasty,18(7 Suppl 1),68-78.
Gencur, S., Rimnac, C. M., & Kurtz, S. M.(2003).Failure micromechanisms during uniaxial tensile fracture of conventional and highly crosslinked ultra-high molecular weight polyethylenes used in total joint replacements..Biomaterials,24(22),3947-54.
Akkus, O., Knott, D., Jepsen, K., Davy, D., & Rimnac, C. M.(2003).Relationship between damage accumulation and mechanical property degradation in cortical bone: microcrack orientation is important..Journal of biomedical materials research. Part A,65(4),482-8.
Dean, D., Topham, N., Meneghetti, S., Wolfe, M., Jepsen, K., Kasheff, Z., Chen, J., Fisher, J., Cooke, M. N., Rimnac, C. M., & Mikos, A. M.(2003).Poly(propylene fumarate) and poly(DL-lactic-co-glycolic acid) as scaffold materials for solid and foam-coated composite tissue-engineered constructs for cranial reconstruction..Tissue engineering,9(3),495-504.
Bergström, J., Rimnac, C. M., & Kurtz, S. M.(2003).Prediction of multiaxial mechanical behavior for conventional and highly crosslinked UHMWPE using a hybrid constitutive model..Biomaterials,24(8),1365-80.
Cooke, M. N., Fisher, J. N., Dean, D. N., Rimnac, C. M., & Mikos, A. M.(2003).Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth..Journal of biomedical materials research. Part B, Applied biomaterials,64(2),65-9.
Kurtz, S., Villarraga, M., Herron, M., Bergström, J., Rimnac, C. M., & Edidin, A. M.(2002).Thermomechanical behavior of virgin and highly crosslinked ultra-high molecular weight polyethylene used in total joint replacements..Biomaterials,23(17),3681-97.
Wolfe, M., Dean, D., Chen, J., Fisher, J., Nrasimhan, S., Rimnac, C. M., & Mikos, A. M.(2002).In vitro degradation and fracture toughness of multilayered porous poly(propylene fumarate)/beta-tricalcium phosphate scaffolds..Journal of biomedical materials research,61(1),159-64.
Bergström, J., Kurtz, S., Rimnac, C. M., & Edidin, A. M.(2002).Constitutive modeling of ultra-high molecular weight polyethylene under large-deformation and cyclic loading conditions..Biomaterials,23(11),2329-43.
Akkus, O., & Rimnac, C. M.(2001).Fracture resistance of gamma radiation sterilized cortical bone allografts..Journal of orthopaedic research : official publication of the Orthopaedic Research Society,19(5),927-34.
Akkus, O., & Rimnac, C. M.(2001).Cortical bone tissue resists fatigue fracture by deceleration and arrest of microcrack growth..Journal of biomechanics,34(6),757-64.
Gadeleta, S., Boskey, A., Paschalis, E., Carlson, C., Menschik, F., Baldini, T., Peterson, M., & Rimnac, C. M.(2000).A physical, chemical, and mechanical study of lumbar vertebrae from normal, ovariectomized, and nandrolone decanoate-treated cynomolgus monkeys (Macaca fascicularis)..Bone,27(4),541-50.
Wong, C., Rohatgi, S., Kraay, M., Goldberg, V., & Rimnac, C. M.(2000).Effect of resin type and manufacturing method on wear of polyethylene tibial components..Clinical orthopaedics and related research.
Kurtz, S., Rimnac, C. M., Pruitt, L. M., Jewett, C. M., Goldberg, V. M., & Edidin, A. M.(2000).The relationship between the clinical performance and large deformation mechanical behavior of retrieved UHMWPE tibial inserts..Biomaterials,21(3),283-91.
Dean, D., Topham, N., Rimnac, C. M., Mikos, A. M., Goldberg, D. M., Jepsen, K. M., Redtfeldt, R. M., Liu, Q. M., Pennington, D. M., & Ratcheson, R. M.(1999).Osseointegration of preformed polymethylmethacrylate craniofacial prostheses coated with bone marrow-impregnated poly (DL-lactic-co-glycolic acid) foam..Plastic and reconstructive surgery,104(3),705-12.
Kurtz, S., Rimnac, C. M., & Bartels, L. M.(1998).Predictive model for tensile true stress-strain behavior of chemically and mechanically degraded ultrahigh molecular weight polyethylene..Journal of biomedical materials research,43(3),241-8.
