Chen, Q., Han, L., Ren, J., Rong, L., Cao, P., & Advincula, R.(2020).4D Printing via an Unconventional Fused Deposition Modeling Route to High-Performance Thermosets.ACS Applied Materials & Interfaces,12(44),50052-50060.
Advincula, R., Dizon, J., Chen, Q., Niu, I., Chung, J., Kilpatrick, L., & Newman, R.(2020).Additive manufacturing for COVID-19: devices, materials, prospects, and challenges.MRS Communications,10(3),413-427.
Dizon, J., Valino, A., Souza, L., Espera, A., Chen, Q., & Advincula, R.(2020).3D Printed Injection Molds Using Various 3D Printing Technologies.Materials Science Forum,1005, 150-156.
Yang, J., Karathanasis, E., Chen, Q., Zhu, Z., Zhao, Y., Yu, X., Zhu, H., Cao, J., & Li , X.(2020).Reversible splenial lesion syndrome (RESLES) due to acute intermittent porphyria with a novel mutation in the hydroxymethylbilane synthase gene..Orphanet journal of rare diseases,15(1),98.
Mulvihill, M., Luo, R., Estill, J., Liu, Y., Prentiss, M., Wang, J., Wang, Q., Zhao, S., Wang, X., Yang, S., Feng, J., Li , W., Liu, X., Zhang, G., Wang, Y., Zhou, Q., Meng, W., Qi, X., Xun, Y., Yu, X., Chen, Q., & On Behalf Of The Covid-Evidence And Recommendations Working Group, Q.(2020).Coronavirus disease (COVID-19): a scoping review..Euro surveillance : bulletin Europeen sur les maladies transmissibles = European communicable disease bulletin,25(15).
Wang, R., Cheng, K., Advincula, R. C., & Chen, Q. C.(2019).On the thermal processing and mechanical properties of 3D-printed polyether ether ketone.MRS Communications,9(03),1046-1052.
Espera, A., Dizon, J., Chen, Q., & Advincula, R. C.(2019).3D-printing and advanced manufacturing for electronics.Progress in Additive Manufacturing,4(3),245-267.
De Leon, A., Imperial, R., Chen, Q., & Advincula, R. C.(2019).One-Step Fabrication of Superhydrophobic/Superoleophilic Electrodeposited Polythiophene for Oil and Water Separation.Macromolecular Materials and Engineering,304(7).
De Leon, A., Imperial, R., Chen, Q., & Advincula, R. C.(2019).One-Step Fabrication of Superhydrophobic/Superoleophilic Electrodeposited Polythiophene for Oil and Water Separation.Macromolecular Materials and Engineering.
Wei, P., Leng, H., Chen, Q., Advincula, R. C., & Pentzer, E. C.(2019).Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing.ACS Applied Polymer Materials,1(4),885-892.
Wei, P., Leng, H., Chen, Q., Advincula, R. C., & Pentzer, E. C.(2019).Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing.ACS Applied Polymer Materials,1(4),885-892.
Espera, A., Valino, A., Palaganas, J., Souza, L., Chen, Q., & Advincula, R. C.(2019).3D Printing of a Robust Polyamide-12-Carbon Black Composite via Selective Laser Sintering: Thermal and Electrical Conductivity.Macromolecular Materials and Engineering,304(4).
Espera, A., Valino, A., Palaganas, J., Souza, L., Chen, Q., & Advincula, R. C.(2019).3D Printing of a Robust Polyamide-12-Carbon Black Composite via Selective Laser Sintering: Thermal and Electrical Conductivity.Macromolecular Materials and Engineering,304(4).
Dizon, J., Chen, Q., Valino, A., & Advincula, R. C.(2019).Thermo-mechanical and swelling properties of three-dimensional-printed poly (ethylene glycol) diacrylate/silica nanocomposites.MRS Communications,9(01),209-217.
Espera, A., Dizon, J., Chen, Q., & Advincula, R. C.(2019).3D-printing and advanced manufacturing for electronics.Progress in Additive Manufacturing.
Ye, P., Cao, P., Chen, Q., & Advincula, R. C.(2019).Continuous Flow Fabrication of Block Copolymer�Grafted Silica Micro-Particles in Environmentally Friendly Water/Ethanol Media.Macromolecular Materials and Engineering,304(2).
Ye, P., Cao, P., Chen, Q., & Advincula, R. C.(2019).Continuous Flow Fabrication of Block Copolymer�Grafted Silica Micro-Particles in Environmentally Friendly Water/Ethanol Media.Macromolecular Materials and Engineering,304(2).
Ye, P., Cao, P., Chen, Q., & Advincula, R. C.(2018).Continuous Flow Fabrication of Block Copolymer-Grafted Silica Micro-Particles in Environmentally Friendly Water/Ethanol Media.Macromolecular Materials and Engineering.
Chen, Q., Cao, P., & Advincula, R. C.(2018).Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing.Advanced Functional Materials.
Dizon, J., Espera, A., Chen, Q., & Advincula, R. C.(2018).Mechanical Characterization of 3D-Printed Polymers.Additive Manufacturing,20, 44-67.
Schur, R., Gao, S., Yu, S., Chen, Q., Maeda, A., Palczewski, K., & Lu, Z.(2018).New GABA modulators protect photoreceptor cells from light-induced degeneration in mouse models..FASEB journal : official publication of the Federation of American Societies for Experimental Biology.
Chen, Q., Mangadlao, J., Wallat, J., De Leon, A., Pokorski, J. K., & Advincula, R. C.(2017).3D Printing Biocompatible Polyurethane/Poly (lactic acid)/Graphene Oxide Nanocomposites: Anisotropic Properties.ACS Applied Materials & Interfaces.
Manapat, J., Chen, Q., Ye, P., & Advincula, R. C.(2017).3D Printing of Polymer Nanocomposites via Stereolithography.Macromolecular Materials and Engineering.
Chen, Q., Li , W., Jiang, K., Wang, C., & Yu, X.(2016).Rapid T2 mapping of mouse heart using the carr-purcell-meiboom-gill sequence and compressed sensing reconstruction..Journal of magnetic resonance imaging : JMRI,44(2),375-82.
Hamilton, J., Jiang, Y., Chen, Q., Mahanta, N., Lo , W., Griswold, M., & Seiberlich, N. E.(2016).MR fingerprinting for rapid quantification of myocardial T<sub>1</sub> , T<sub>2</sub> , and proton spin density..Magnetic resonance in medicine.
Chen, Q., Jiang, Y., Pahwa, S., Mahanta, N., Berglund, L., Twieg, M., Wright, K., Seiberlich, N. E., Griswold, M. E., & Gulani, V. E.(2016).MR Fingerprinting for Rapid Quantitative Abdominal Imaging..Radiology.
De Leon, A., Chen, Q., Palaganas, N., Palaganas, J., Manapat, J., & Advincula, R. C.(2016).High performance polymer nanocomposites for additive manufacturing applications.Reactive and Functional Polymers [13815148],103, 141-155.
Chen, Q., Lee, H., Wright, K., Badve, C., Nakamoto, D., Yu, X., Schluchter, M., Griswold, M., Seiberlich, N. E., & Gulani, V. E.(2015).Free-breathing liver perfusion imaging using 3-dimensional through-time spiral generalized autocalibrating partially parallel acquisition acceleration..Investigative radiology,50(6),367-75.
Zhang, Z., Zhou, Z., Joshi-Imre, A., Wang, J., Wu, Y., Sun, D., Chen, Q., Zhu, H., Magi-Galluzzi, C., & Lu, Z.(2015).EDB Fibronectin Specific Peptide for Prostate Cancer Targeting..Bioconjugate chemistry,26(5),830-8.
Chen, Q., Lee, H., Aandal, G., Badve, C., Wright, K., Griswold, M., Seiberlich, N. E., & Gulani, V. E.(2015).Rapid volumetric t<sub>1</sub> mapping of the abdomen using three-dimensional through-time spiral GRAPPA..Magnetic resonance in medicine.
Chen, Q., Denoyer, L., Zhong, M., Li , X., Ryan, C., Chandler, M., Calvin, S., Xiao, F., Negia, M., Low, W., Zhang, J., & Yu, X.(2015).The Structural Basis of Functional Improvement in Response to Human Umbilical Cord Blood Stem Cell Transplantation in Hearts With Postinfarct LV Remodeling..Cell transplantation,24(6),971-83.
Chen, Q., Zhang, X., Zhang, G., & Xue, A.(2015).Comparative analysis of a novel disease phenotype network based on clinical manifestations.JOURNAL OF BIOMEDICAL INFORMATICS,53, 113-120.
Chen, Q., Denoyer, L., Zhong, M., Liu, X., Ryan, C., Chandler, M., Calvin, S., Xiao, F., Negia, M., Low, W., Zhang, J., & Yu, X.(2015).The Structural Basis of Functional Improvement in Response to Human Umbilical Cord Blood Stem Cell Transplantation in Hearts With Postinfarct LV Remodeling.CELL TRANSPLANTATION,24(6),971-983.
Wright, K., Chen, Q., Saybasili, H., Griswold, M., Seiberlich, N. E., & Gulani, V. E.(2014).Quantitative high-resolution renal perfusion imaging using 3-dimensional through-time radial generalized autocalibrating partially parallel acquisition..Investigative radiology,49(10),666-74.
Barkauskas, K., Rajiah, P., Ashwath, R., Hamilton, J., Chen, Q., Mahanta, N., Wright, K., Gulani, V., Griswold, M., & Seiberlich, N. E.(2014).Quantification of left ventricular functional parameter values using 3D spiral bSSFP and through-time Non-Cartesian GRAPPA..Journal of cardiovascular magnetic resonance : official journal of the Society for Cardiovascular Magnetic Resonance,16(1),65.
Chen, Q., Denoyer, L., Zhong, M., Li , X., Ryan, C., Chandler, M., Calvin, S., Xiao, F., Negia, M., Low, W., Zhang, J., & Yu, X.(2013).The Structural Basis of Functional Improvement in Response to Human Umbilical Cord Blood Stem Cell Transplantation..Cell transplantation.
Chen, Q., Ren, X., Zhang, G., & Xue, A.(2013).Ontology-guided organ detection to retrieve web images of disease manifestation: towards the construction of a consumer-based health image library..Journal of the American Medical Informatics Association : JAMIA,20(6),1076-81.
Wu, Y., Balu, N., Li , W., Chen, Q., Joshi-Imre, A., Kummitha, C., Yu, X., Yuan, C., & Lu, Z.(2013).Molecular MRI of atherosclerotic plaque progression in an ApoE(-/-) mouse model with a CLT1 peptide targeted macrocyclic Gd(III) chelate..American journal of nuclear medicine and molecular imaging,3(5),446-55.
Patel, V., Gokulrangan, G., Chowdhury, S., Chen, Q., Sloan, A., Koyutürk, M., Barnholtz-Sloan, J., & Chance, M.(2013).Network signatures of survival in glioblastoma multiforme..PLoS computational biology,9(9),e1003237.
Chen, Q., Payne, K., Perara, V., Huang, S., Baba, A., Matsuda, T., & Yu, X.(2012).Inhibition of the sodium-calcium exchanger via SEA0400 altered manganese-induced T1 changes in isolated perfused rat hearts..NMR in biomedicine,25(11),1280-5.
Chen, Q., Payne, K., Perara, V., Huang, S., Baba, A., Matsuda, T., & Yu, X.(2012).Inhibition of the sodium-calcium exchanger via SEA0400 altered manganese-induced T1 changes in isolated perfused rat hearts..NMR in biomedicine,25(11),1280-5.
Desjardins, C., Chen, Q., Coulton, A., Hoit, B., Yu, X., & Stelzer, J.(2012).Cardiac myosin binding protein C insufficiency leads to early onset of mechanical dysfunction..Circulation. Cardiovascular imaging,5(1),127-36.
Bishop, M., Engle, S., Howard, D., Whalen, S., Hudson, R., Ahn, G., Kulkarni, K., Chen, Q., Nyemba, S., Malin, B., & Others, B.(2012).DEPENDABLE AND SECURE COMPUTING..
Desjardins, C., Chen, Q., Coulton, A., Hoit, B., Yu, X., & Stelzer, J.(2012).Cardiac myosin binding protein C insufficiency leads to early onset of mechanical dysfunction..Circulation. Cardiovascular imaging,5(1),127-36.
Li, J., Horstman, B., & Chen, Q.(2011).Detecting epistatic effects in association studies at a genomic level based on an ensemble approach..Bioinformatics (Oxford, England),27(13),i222-9.
Chen, Q., Wang, Z., Zhou, Y., Shields, R., Chanda, S., Elston, R., & Li, J.(2011).In silico gene prioritization by integrating multiple data sources..PloS one,6(6),e21137.
Chen, Q., Somji, A., Yu, X., & Stelzer, J.(2010).Altered in vivo left ventricular torsion and principal strains in hypothyroid rats..American journal of physiology. Heart and circulatory physiology,299(5),H1577-87.
Chen, Q., Somji, A., Yu, X., & Stelzer, J.(2010).Altered in vivo left ventricular torsion and principal strains in hypothyroid rats..American journal of physiology. Heart and circulatory physiology,299(5),H1577-87.
Chen, Q., Li , X., & Li, J.(2010).A novel approach for haplotype-based association analysis using family data..BMC bioinformatics,11 Suppl 1, S45.
Li , X., Chen, Q., & Li, J.(2010).Detecting genome-wide haplotype polymorphism by combined use of Mendelian constraints and local population structure..Pacific Symposium on Biocomputing. Pacific Symposium on Biocomputing.
Li, J., & Chen, Q.(2008).Generating samples for association studies based on HapMap data..BMC bioinformatics,9, 44.
Zhang, S., Suri, J., Salvado, O., Chen, Q., Wacker, F., Wilson, D. L., Duerk, J. L., & Lewin, J. L.(2005).Inter- and Intra-Observer Variability Assessment of in Vivo Carotid Plaque Burden Quantification Using Multi-Contrast Dark Blood MR Images..Studies in health technology and informatics,113, 384-93.
